Dynapac shows new-generation CA rollers at INTERMAT 2012
Dynapac’s new fifth generation CA single drum vibratory rollers are the first of their type with cross-mounted engines and they can run using a mix of biodiesel and diesel.
January 6, 2017
Read time: 2 mins
The CA6000: fifth generation roller
206 Dynapac’s new fifth generation CA single drum vibratory rollers are the first of their type with cross-mounted engines and they can run using a mix of biodiesel and diesel.
The CA5000, CA6000 and CA6500 compactors feature a fuel-saving system designed to reduce fuel consumption and CO2 emissions and new design to make servicing and maintenance easier.
Among other new features are optimised amplitude for improved compaction performance and ‘Active Bouncing Control’ to prevent damage to the machine and over-compaction.
The three new CA rollers have static linear loads of 50, 60 and 65kg/cm, respectively. The amplitude of 2.1mm is designed to allow rock fill to be compacted in almost 2m-thick layers and the rock size can be up to 1m in diameter. This results in higher volume capacity and fewer passes to reach compaction specifications, said Dynapac, giving fuel savings and reducing the cost per compacted cubic metre.
The new CA rollers are available with Stage IIIB engines (prepared for Stage IV) from 201 Deutz. They can be used with a mix of biodiesel and fossil diesel fuel; some can be run on 20% biodiesel. A fuel-saving system is designed to minimise fuel consumption and CO2 emissions by ensuring that the roller does not consume more power than needed at any time.
Claiming to be the only 2.5m feeder on the market, Dynapac says its new MF2500C material feeder offers easy and cost effective transport (no need for permissions). “Operating contact-free, the Dynapac MF2500CS feeder ensures an even material flow for all kind of asphalt and gravel layers,”says Dynapac. The core of the Dynapac MF2500C is its high-performance conveying system, which can feed 27tonnes of gravel, sand or asphalt in 35 seconds, says Dynapac.
Putzmeister’s new BSC 1409 D self-propelled concrete pump is designed for concreting drilled piles on unfinished surfaces and can deliver up to 85m3/hr at a pressure of up to 71bar. Powered by a 6-cylinder Deutz engine producing 129kW, the BSC 1409 D can travel at a maximum speed of 3.6km and does not need supports to be set up each time it moves.
Putzmeister’s new BSC 1409 D self-propelled concrete pump is designed for concreting drilled piles on unfinished surfaces and can deliver up to 85m3/hr at a pressure of up to 71bar. Powered by a 6-cylinder Deutz engine producing 129kW, the BSC 1409 D can travel at a maximum speed of 3.6km and does not need supports to be set up each time it moves.
Liebherr is launching a revised R922 crawler excavator, replacing the previous R906 and joining the R918 and R926 in the company’s medium weight line-up. Powered by a Stage IIIB Liebherr diesel engine, developing 105kW (143hp), the R922 weighs in at 22 tonnes and designed as a general purpose civils machine. Using a Dual Circuit Positive Control hydraulic system, the excavator is said to consume less energy than previous models, resulting in fuel savings for the customer. The machine on show will be exhibit
