Dana shows HVT R3 at INTERMAT

Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
January 6, 2017 Read time: 1 min
The R3 is the first of a new range of hydro-mechanical variable transmissions from Dana
RSS2254 Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and 2253 Bosch Rexroth AG.

The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%.

Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.

www.dana.com

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • New Holland upgrades dozers to Tier4i and improves control
    April 19, 2013
    New Holland is exhibiting the 17.9tonne operating weight D150CXLT dozer. It is one of a range of three dozers between 13 and 20tonnes using Tier4i engines fitted with SCR technology to achieve the emissions target and produce a 10.5% fuel saving. It is said to have the quietest cab in the industry (76dB(A)), best-in-class drawbar pull with hydrostatic transmission (311kN) and integration with GPS and laser guidance.
    Read More
  • Allu adds extra durability to D-series screen crusher buckets
    January 6, 2017
    Allu has upgraded its screener crusher buckets with the introduction of the new six-model D-Series range suitable for excavators from 10 to 40tonnes and wheel loaders between five and 30tonnes. The design allows the buckets to be used for crushing demolition waste, asphalt and glass using replaceable hammer heads to produce end product between 25mm and 100mm. They can also be configured to screen materials with product size from 0-15mm, 0-25mm or 0-35mm and can be used for mixing in lime or other products
    Read More
  • Allu adds extra durability to D-series screen crusher buckets
    April 19, 2012
    Allu has upgraded its screener crusher buckets with the introduction of the new six-model D-Series range suitable for excavators from 10 to 40tonnes and wheel loaders between five and 30tonnes. The design allows the buckets to be used for crushing demolition waste, asphalt and glass using replaceable hammer heads to produce end product between 25mm and 100mm. They can also be configured to screen materials with product size from 0-15mm, 0-25mm or 0-35mm and can be used for mixing in lime or other products
    Read More
  • BLS brings W series Tufpads to Europe
    January 6, 2017
    BLS Enterprises is promoting its full range of Tufpads polyurethane track pads for pavers and asphalt milling machines, including the European introduction of its W series. W series pads can be used as a direct replacement for Wirtgen’s EPS system. Polyurethane lasts two or three times longer than rubber, said president Barry Stoughton. The Tufpads system is available in both one-piece and two-piece versions. The one-piece pads are bonded to the metal, while pads in the two-piece system are bolted on. This
    Read More

Highlighted Content