Dana shows HVT R3 at INTERMAT

Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
January 6, 2017 Read time: 1 min
The R3 is the first of a new range of hydro-mechanical variable transmissions from Dana
RSS2254 Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and 2253 Bosch Rexroth AG.

The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%.

Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.

www.dana.com

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • BLS brings W series Tufpads to Europe
    April 19, 2012
    BLS Enterprises is promoting its full range of Tufpads polyurethane track pads for pavers and asphalt milling machines, including the European introduction of its W series. W series pads can be used as a direct replacement for Wirtgen’s EPS system. Polyurethane lasts two or three times longer than rubber, said president Barry Stoughton. The Tufpads system is available in both one-piece and two-piece versions. The one-piece pads are bonded to the metal, while pads in the two-piece system are bolted on. This
    Read More
  • Engine/component efficiencies are top bill
    May 25, 2016
    Driveline specialist Dana is developing a full connectivity suite for its transmissions, axles and other driveline components. The Dana Spicer Smart Suite collects, manages, analyses, communicates and acts on data from the complete drivetrain, including load and condition monitoring, torque management, speed sensing and steering sensing. This provides critical alerts and allows the operator to react to operational changes, boosting productivity and safety. “As the construction market becomes more comp
    Read More
  • ZF shows cPower for wheeled loaders at INTERMAT
    January 6, 2017
    ZF Transmissions used INTERMAT to reveal its cPower continuously variable transmission (CVT) for wheeled loaders up to 210kW. Using experience gained in the agricultural tractor sector, where CVTs have been in use for more than 10 years, ZF’s cPower transmission uses a blend of hydrostatics and mechanical drives to split power throughout the entire working speed range.
    Read More
  • ZF shows cPower for wheeled loaders at INTERMAT
    April 18, 2012
    ZF Transmissions used INTERMAT to reveal its cPower continuously variable transmission (CVT) for wheeled loaders up to 210kW. Using experience gained in the agricultural tractor sector, where CVTs have been in use for more than 10 years, ZF’s cPower transmission uses a blend of hydrostatics and mechanical drives to split power throughout the entire working speed range.
    Read More

Highlighted Content