Dana shows HVT R3 at INTERMAT

Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
January 6, 2017 Read time: 1 min
The R3 is the first of a new range of hydro-mechanical variable transmissions from Dana
RSS2254 Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and 2253 Bosch Rexroth AG.

The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%.

Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.

www.dana.com

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • INTERMAT reveal for Hyundai’s 22tonne hybrid excavator
    April 17, 2012
    Hyundai used INTERMAT to show its 22tonne hybrid excavator – the 220LC-9. Designed and developed in-house with electric components from the company’s electronics division, the Hybrid 220LC uses an electric motor for its slew functions, enabling a smaller engine to be fitted.“This combination means we can use a four-cylinder 98kW engine in the hybrid compared to a six-cylinder 118kW engine in the conventional R220LC-9,” explained Hyundai product engineer Joachim Van de Perre.
    Read More
  • INTERMAT visitors first to see new high flow Bobcat telehandler
    January 6, 2017
    Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
    Read More
  • INTERMAT visitors first to see new high flow Bobcat telehandler
    April 18, 2012
    Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
    Read More
  • Bridgestone widens off-road range with new size options
    January 6, 2017
    Bridgestone has increased the available sizes for some of its popular off-road tyres. The VLTS tyre for articulated dump trucks now comes as an 875/65 R29 to suit top weight machines and additional sizes are also now available for the VSW and the VJT L3 pattern tyre, which are usually used on wheel loaders.
    Read More

Highlighted Content