Dana shows HVT R3 at INTERMAT

Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
January 6, 2017 Read time: 1 min
The R3 is the first of a new range of hydro-mechanical variable transmissions from Dana
RSS2254 Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and 2253 Bosch Rexroth AG.

The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%.

Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.

www.dana.com

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • Bridgestone widens off-road range with new size options
    April 19, 2012
    Bridgestone has increased the available sizes for some of its popular off-road tyres. The VLTS tyre for articulated dump trucks now comes as an 875/65 R29 to suit top weight machines and additional sizes are also now available for the VSW and the VJT L3 pattern tyre, which are usually used on wheel loaders.
    Read More
  • Yanmar shows tracked swivel skip at INTERMAT
    January 6, 2017
    Yanmar Construction Equipment chose INTERMAT to reveal its latest tracked dumper development – the prototype C30R-2R – complete with swivel skip body. The 2,500kg skip can be slewed through 180 degrees, allowing material to be discharged anywhere around the front of the machine. In addition, the C30R-2R also uses a reverse drive console. With dual controls, the reverse drive platform allows the operator to spin the seat through180 degrees to remain facing forward when driving the machine in either direction
    Read More
  • Yanmar shows tracked swivel skip at INTERMAT
    April 17, 2012
    Yanmar Construction Equipment chose INTERMAT to reveal its latest tracked dumper development – the prototype C30R-2R – complete with swivel skip body. The 2,500kg skip can be slewed through 180 degrees, allowing material to be discharged anywhere around the front of the machine. In addition, the C30R-2R also uses a reverse drive console. With dual controls, the reverse drive platform allows the operator to spin the seat through180 degrees to remain facing forward when driving the machine in either direction
    Read More
  • Wacker Neuson’s new mini excavators break cover at INTERMAT
    January 6, 2017
    Wacker Neuson has renewed its 1.7 to 2.4tonnes mini excavator range with the introduction of the ET18, ET20 and ET24. The enlarged can has a lower and broader entrance for easier access and egress. The company’s Vertical Digging System (VDS) is an option, allowing the upperstructure to be set vertical when working on gradients up to 27%.
    Read More

Highlighted Content