Cummins moves closer to Stage IV emissions at INTERMAT

Cummins is using INTERMAT to display a full line-up of engines in the 56-506kW sector with next generation exhaust after treatment systems that meet EU Stage IV and EPA Tier 4 Final emissions regulations.
January 6, 2017 Read time: 1 min

196 Cummins is using INTERMAT to display a full line-up of engines in the 56-506kW sector with next generation exhaust after treatment systems that meet EU Stage IV and EPA Tier 4 Final emissions regulations.

Cummins QSB6.7 mid-range achieves an impressive 231kW peak power at 2,200rpm, with ratings available down to 109kW. The QSB6.7 uses the Cummins Compact Catalyst-Selective Catalytic Reduction (CCC-SCR) after treatment system to meet the forthcoming requirements.

Heavy-duty power will be highlighted by the QSX15 rated up to 503kW at 2,100 rpm with a peak torque of almost 2800Nm. The QSX15’s after treatment system combines the Cummins Particulate Filter with Selective Catalytic Reduction (CPF-SCR).

“Cummins will be ready to meet the near-zero level of emission regulations with the most productive engine range we have ever had available for our construction equipment customers,” said Bryden Clewlow, director of Cummins off-highway sales Europe.

“Our in-house technology expertise also extends to high-pressure common rail fuel systems, filtration systems, electronic controls and variable geometry turbocharging to fully optimise engine performance.”

%$Linker: External 0 0 0 oLinkExternal www.cumminsengines.com Cummins false http://www.cumminsengines.com/ false false%>

Hall: 5B Stand: M027

For more information on companies in this article

Related Content

  • MTU reveals sulphur tolerance solution for lesser regulated markets
    March 6, 2014
    A high-sulphur fuel capability has been announced by MTU for its industrial engines. The move enables OEM’s to adopt the latest MTU engine technology in countries where ultra-low sulphur diesel (ULSD) is not available. MTU’s sulphur tolerance solution will be available in mid-2014 for Tier 4 Interim 900, 500 and 460 series engines. This will be followed by the company’s complete line up of Tier 4 Final certified engines in the 1000-1500 series in the future.
    Read More
  • C-series CX470 excavator takes centre stage on Case’s INTERMAT stand
    January 6, 2017
    A 6% increase in lift capacity, greater digging efficiency, reduced emissions and up to 5% lower fuel consumption are the benefits of Case’s new CX470C excavator. The 47 to 50tonne machine has a 9.8litre Stage IIIB engine delivering 270kW at 2,000rpm which contributes to a 5% increase in fuel efficiency and 5% faster cycle times. Some of the savings come from a Boom Economy Control, which automatically reduces engine revs and hydraulic power to the boom when speed and power are not a priority.
    Read More
  • C-series CX470 excavator takes centre stage on Case’s INTERMAT stand
    April 19, 2012
    A 6% increase in lift capacity, greater digging efficiency, reduced emissions and up to 5% lower fuel consumption are the benefits of Case’s new CX470C excavator. The 47 to 50tonne machine has a 9.8litre Stage IIIB engine delivering 270kW at 2,000rpm which contributes to a 5% increase in fuel efficiency and 5% faster cycle times. Some of the savings come from a Boom Economy Control, which automatically reduces engine revs and hydraulic power to the boom when speed and power are not a priority.
    Read More
  • Rolls Royce Power ready for Stage V in construction
    February 10, 2016
    Engine manufacturer MTU, a division of Rolls Royce Power Systems, is using a range of technologies to meet the proposed EU Stage V emissions regulations that are expected in 2019. The company’s 1000-1500 engine ranges, with power outputs of 100-480kW, will be available with both one-box and two-box exhaust after treatment solutions, including diesel particulate filters (DPF) and selective catalytic reduction (SCR) with a diesel exhaust fluid. The engines use Daimler commercial vehicle engines as a base and
    Read More

Highlighted Content