Skip to main content

Cummins moves closer to Stage IV emissions at INTERMAT

Cummins is using INTERMAT to display a full line-up of engines in the 56-506kW sector with next generation exhaust after treatment systems that meet EU Stage IV and EPA Tier 4 Final emissions regulations.
January 6, 2017 Read time: 1 min

196 Cummins is using INTERMAT to display a full line-up of engines in the 56-506kW sector with next generation exhaust after treatment systems that meet EU Stage IV and EPA Tier 4 Final emissions regulations.

Cummins QSB6.7 mid-range achieves an impressive 231kW peak power at 2,200rpm, with ratings available down to 109kW. The QSB6.7 uses the Cummins Compact Catalyst-Selective Catalytic Reduction (CCC-SCR) after treatment system to meet the forthcoming requirements.

Heavy-duty power will be highlighted by the QSX15 rated up to 503kW at 2,100 rpm with a peak torque of almost 2800Nm. The QSX15’s after treatment system combines the Cummins Particulate Filter with Selective Catalytic Reduction (CPF-SCR).

“Cummins will be ready to meet the near-zero level of emission regulations with the most productive engine range we have ever had available for our construction equipment customers,” said Bryden Clewlow, director of Cummins off-highway sales Europe.

“Our in-house technology expertise also extends to high-pressure common rail fuel systems, filtration systems, electronic controls and variable geometry turbocharging to fully optimise engine performance.”

%$Linker: External 0 0 0 oLinkExternal www.cumminsengines.com Cummins false http://www.cumminsengines.com/ false false%>

Hall: 5B Stand: M027

For more information on companies in this article

Related Content

  • Rolls Royce Power ready for Stage V in construction
    January 6, 2017
    Engine manufacturer MTU, a division of Rolls Royce Power Systems, is using a range of technologies to meet the proposed EU Stage V emissions regulations that are expected in 2019. The company’s 1000-1500 engine ranges, with power outputs of 100-480kW, will be available with both one-box and two-box exhaust after treatment solutions, including diesel particulate filters (DPF) and selective catalytic reduction (SCR) with a diesel exhaust fluid. The engines use Daimler commercial vehicle engines as a base and
  • High performance excavators from LiuGong
    January 6, 2017
    LiuGong is following up its introduction of its first E series excavator, the 922E, with a whole new range. The top-of-the-line model is the its 945E, which competes in the 45tonne class, features a 2.2m3 bucket and is powered by a Cummins diesel delivering 298kW. Also due are the 30tonne class 930E and 25tonne class 925E, which share similar features. The E-Series excavators are offered with the LiuGong Intelligent Power Control System (IPC), which provides more accurate matching and control over engine sp
  • High performance excavators from LiuGong
    February 8, 2013
    LiuGong is following up its introduction of its first E series excavator, the 922E, with a whole new range. The top-of-the-line model is the its 945E, which competes in the 45tonne class, features a 2.2m3 bucket and is powered by a Cummins diesel delivering 298kW. Also due are the 30tonne class 930E and 25tonne class 925E, which share similar features. The E-Series excavators are offered with the LiuGong Intelligent Power Control System (IPC), which provides more accurate matching and control over engine sp
  • Volvo reveals mid-sized wheeled loaders at INTERMAT
    January 6, 2017
    Latest Volvo wheeled loaders to get the G-series revisions include the middle-weight 11-17 tonne L60, L70 and L90 versions. The stylish overhaul brings an electrically operated sloping bonnet, improving rearward visibility. All benefit from a revised cab layout, cleaner engines and improved hydraulic systems to deliver more productivity and greater efficiency. Power ratings are from 121-130kW, with all three sharing a stage IIIB six-cylinder Volvo D6H motor that gets cooled EGR and DPF emissions equipment.