The crawler excavator operator in this incident had a close call when the bridge being demolished collapsed unexpectedly. The accident happened in Norway during the demolition of an old highway bridge.
June 18, 2013
Read time: 1 min
The crawler excavator operator in this incident had a close call when the bridge being demolished collapsed unexpectedly. The accident happened in Belgium during the demolition of an old highway bridge.
In Germany a short tailswing excavator from Doosan has carried out a tricky demolition project. The DX235LCR machine was used to demolish an old residential property, located in close proximity to a road. Belgian demolition contractor Klaus Anthes was brought in to carry out the work in Eppstein in Germany, and used the 24tonne excavator for the job. The work was tricky as the house was located on the side of a hill and also next to a narrow road. However traffic could not be disturbed so the machine had to
A bridge demolition job went spectacularly wrong in Finland recently. Luckily for all concerned, there were no casualties, but it could have quite easily been a different story. A demolition contractor was using an excavator fitted with a hydraulic breaker to break up the structure, but the work was carrying on despite live traffic flowing on the road under the bridge.
Note too the behaviour of drivers on the route after the initial collapse.
This video came just as the European Demolition Association headed to Finland’s capital Helsinki to discuss best practice.
A bridge located in Prague, capital of the Czech Republic, is facing calls for its demolition. Concern has been expressed over the condition of the Hlavka Bridge, which spans the Vltava River. The bridge carries heavy vehicle traffic as well as trams and is one of the city’s major transport arteries. It was built originally from 1909 to 1912, replacing an earlier wooden structure. It was then rebuilt so as to cope with vehicle traffic and at present carries up to 100,000 vehicles/day, making it one of the b
