Short tailswing excavator gains access

In Germany a short tailswing excavator from Doosan has carried out a tricky demolition project. The DX235LCR machine was used to demolish an old residential property, located in close proximity to a road. Belgian demolition contractor Klaus Anthes was brought in to carry out the work in Eppstein in Germany, and used the 24tonne excavator for the job. The work was tricky as the house was located on the side of a hill and also next to a narrow road. However traffic could not be disturbed so the machine had to
November 29, 2012 Read time: 2 mins
The reduced radius Doosan excavator was able to demolish a property without disturbing traffic on the narrow road next to it
In Germany a short tailswing excavator from 695 Doosan has carried out a tricky demolition project. The DX235LCR machine was used to demolish an old residential property, located in close proximity to a road. Belgian demolition contractor Klaus Anthes was brought in to carry out the work in Eppstein in Germany, and used the 24tonne excavator for the job.

The work was tricky as the house was located on the side of a hill and also next to a narrow road. However traffic could not be disturbed so the machine had to work within the boundary of the property. Meanwhile the existing natural stone cellar had to be left in place as this was to provide the base for the new property planned for the site, while the garden to the rear also had to be left as this is in a protected natural area.

The contractor rented the excavator along with a sorting grapple from 1130 Bobcat Bensheim. The 24tonne excavator was useful for this project as it features a short radius design with only 185mm of overhang and a swing diameter of just 3.99m, allowing the contractor to work in confined spaces. Reach and stability were also important, to allow the machine to work on the slope.
Earthmoving & soil compaction

For more information on companies in this article

Related Content

  • Develon launches new tunnelling excavator
    February 20, 2025

    Develon has launched the DX235RTF-7 tunnelling excavator, an extension to the company’s line-up of special application machines.

    The DX235RTF-7 is based on Develon’s well-established DX235LCR-7 reduced radius crawler excavator and is powered by a DL06V Stage V engine, providing 141kW of power. The DX235RTF-7 uses the successful compact design and minimum swing radius of the DX235LCR-7. However, the key part of the machine is the heavy duty tunnelling front, offering a new arm and boom design with special kinematics and a tilting function.

    Read More
  • Compact performance
    February 6, 2012
    Doosan is aiming its versatile DX235LCR versatile short tailswing excavator squarely at the growing market for reduced radius machines.
    Read More
  • Compact performance
    April 4, 2012
    Doosan is aiming its versatile DX235LCR versatile short tailswing excavator squarely at the growing market for reduced radius machines. However despite its compact size, the machine features a long undercarriage to maximise its stability. The swing diameter is under 4m, 1,070mm less than that of the conventional chassis DX225LC. Power comes from a six cylinder Doosan diesel rated at 123kW and digging force over the bucket is 14.2tonnes, while use of the power boost feature increases the forces by some 5%, w
    Read More
  • Doosan’s versatile wheeled excavator can operate in confined spaces
    March 14, 2017
    Doosan Bobcat’s new 16.5tonne DX165W-5 wheeled excavator is a short tail swing machine designed for use in compact sites. The machine is also Stage IV compliant and suits duties in urban areas or alongside narrow roads with heavy traffic. It has a short swing radius of 1.85m and is said to offer good stability and weight distribution. The firm claims that the machine provides precise, powerful and smooth digging control as well as low fuel consumption and easy servicing. The DX165W-5 is built with the pr
    Read More

Highlighted Content