Bridgestone develops new traction tyre

The VLTS traction tyre from Bridgestone has been introduced with an increased tread depth to give greater longevity in ADT applications. With 60mm deep tread blocks in place of 47.5mm for the standard tyre, the VLTS in 875/65 R29 is a low-profile replacement for the 29.5 R25 tyre among 40tonne class ADTs.
January 6, 2017 Read time: 1 min
VLTS from Bridgestone offers a deeper tread, contributing to longer service life
The VLTS traction tyre from 175 Bridgestone has been introduced with an increased tread depth to give greater longevity in ADT applications.

With 60mm deep tread blocks in place of 47.5mm for the standard tyre, the VLTS in 875/65 R29 is a low-profile replacement for the 29.5 R25 tyre among 40tonne class ADTs.

The aspect ratio of the 875/65 tyre affords a much wider – and larger – contact patch, offering greater flotation characteristics while maintaining a comparable overall height to that of the 29.5 R25.

The VLTS is also available in a 750/65 R25 to replace 23.5 R25 in the 30tonne ADT class, offering 7mm more tread depth than the standard tyre.

www.bridgestone.eu

View more videos
View more stories

For more information on companies in this article

Related Content

  • Scanlaser aiming for icon status
    April 19, 2012
    Scanlaser is striving for ‘iconic’ status at INTERMAT. The Hexagon Group dealership for Leica Geosystems (LG) products in Europe is at the show promoting LG’s new icon construction project system. “It’s in four elements,” explained Scanlaser director general Pierre Dubreuil. “There’s iconstruct positioning tools, GPS, and robotic total stations for foremen and surveyors; icontrol, a machine control system for excavators, graders and dozers; iconnect telematics to transfer construction site machine informati
    Read More
  • Link-Belt unveils the next generation of its RTC-80110 Series II large rough terrain crane series
    January 6, 2017
    merican crane builder Link-Belt will be showing off the latest in its line of mid-range rough terrain cranes at Bauma, the RTC-8080 Series II, which offers a fully-powered, four-section, 38.7 m (127 ft) long main boom. The RTC-8080 Series II has a two-mode telescope proportioning system known as A-max and three on-board fly options allow operators to use at least four manual offset positions fixed at 2, 15, 30, and 45 degrees. One of the three on-board fly offerings is a 3-piece, bi-fold lattice fly, which
    Read More
  • Link-Belt unveils the next generation of its RTC-80110 Series II large rough terrain crane series
    March 27, 2013
    merican crane builder Link-Belt will be showing off the latest in its line of mid-range rough terrain cranes at Bauma, the RTC-8080 Series II, which offers a fully-powered, four-section, 38.7 m (127 ft) long main boom. The RTC-8080 Series II has a two-mode telescope proportioning system known as A-max and three on-board fly options allow operators to use at least four manual offset positions fixed at 2, 15, 30, and 45 degrees. One of the three on-board fly offerings is a 3-piece, bi-fold lattice fly, which
    Read More
  • Double delight for Powerscreen and DUO in Ghana
    January 6, 2017
    Powerscreen has signed DUO Africa as its first distributor in Ghana. And, as the ink dried on the contract at bauma, the company unveiled a deal to supply three crushing and screening trains. DUO Africa will sell equipment into Ghana and support Powerscreen products in the sub-Saharan region. Among its first contracts is to supply two Powerscreen XA400 primary jaw crushers, two 1000 Maxtrak cone crushers and two Chieftain 2100 triple-deck screens to UK-based Hawk Plant for a number of aggregate crushing ope
    Read More

Highlighted Content