Skip to main content

MOBA’s earthmoving machine controls optimise performance on Russian highway contract

An optimum infrastructure is a decisive factor for the economy of every country in order to facilitate a fast and reliable transport of goods. In Russia, which covers more than 17 million km², the expansion and maintenance of trans-regional roads plays a decisive role Transportation delays and failures due to non- or poorly-upgraded roads cost the country approximately 9% of economic output. Statistics from the Ministry of Transport show that only 8% of all Russian roads are multi-lane. The Russian governme
April 3, 2013 Read time: 3 mins
An excavator on the St Petersburg to Moscow highway is fitted with MOBA Easy Dig

An optimum infrastructure is a decisive factor for the economy of every country in order to facilitate a fast and reliable transport of goods. In Russia, which covers more than 17 million km², the expansion and maintenance of trans-regional roads plays a decisive role

Transportation delays and failures due to non- or poorly-upgraded roads cost the country approximately 9% of economic output. Statistics from the Ministry of Transport show that only 8% of all Russian roads are multi-lane. The Russian government attaches increased importance to the progress of major infrastructure projects such as the construction of the near 700km long motorway from St Petersburg to Moscow.

With this prestige project, the ZAO VAD construction consortium is using technology from 1228 MOBA Mobile Automation. For the construction of embankments of the motorway, which ranges from four to ten lanes depending on section, the company is using a number of excavators with the company’s Easy Dig excavator system.

“Decisive for this project was the fact that the excavators can construct the embankments on the sides of the roads at exactly the specified incline. This can be performed quickly and efficiently with the system,” says Yuri Selesnev, Korrus branch manager in St Petersburg.

Easy Dig uses slope sensors on booms, sticks, buckets and the frame to determine the exact incline angle, the excavation depth and range. As a result, each work step can be performed precisely according to the desired specifications.
“And that is particularly important to us, because we stand for very high quality at our construction sites and therefore need high-precision results,” says Selesnev.

With Easy Dig, it is said excavators can be used effectively and achieve exact results. Interruptions or pauses for example for control measurements are not necessary. By completing the work more quickly, fuel consumption is also reduced and the construction company needs fewer personnel since manual re-measurements with a levelling staff are no longer required.

MOBA says the safety standard on the construction site increases because no personnel need to be located in the working area of the machine.

“What we like very much is the Russian menu system and the availability of all documents such as the operating instructions in Russian. This makes both installation as well as operation very easy", says Selesnev.

“The operator can view all current values on the panel: the additional LED display also simplifies orientation. Even at construction sites where there is limited visibility, this allows work to be performed with precision.”

Easy Dig has watertight sensors making it possible to work under water. Furthermore, the system can easily be upgraded at any time to Link or to Vision 3D, the high-end system, says MOBA.

For more information on companies in this article

Related Content

  • Compaction mapping efficiency
    February 16, 2012
    An efficient pass count mapping system for both soil and asphalt compaction machines is now being offered by Trimble. Called the CCSFlex, this package is designed to offer both asphalt and earthmoving contractors an easy-to-use and affordable system for pass count mapping. The package is said to suit both small contractors as well as contractors with large fleets and can be used on a variety of surfaces, from residential and country roads to major highways and airport runways. The system is said to offer a
  • New functionality for infrasfructure design software
    March 20, 2012
    Chris Bradshaw, Autodesk's vice-president for the Infrastructure Solutions division spoke to World Highways. The launch of the fourth version of its Civil 3D design software early this year will see software maker Autodesk getting serious about its road and general civil engineering package. Bigger projects can be handled in the 2008 version, and a range of new functionality is being added. "Though not everything we would like yet," said Chris Bradshaw, Autodesk's vicepresident for the Infrastructure S
  • Wirtgen W 60 Ri milling units on duty in Norway with Asfalt Remix
    July 3, 2018
    Time is money, especially in Scandinavia where the short road construction season makes efficiency and flexibility a key factor for machines. That's particularly true on small job sites, where work has to be completed quickly but reliably day after day. As soon as the job is done, machines must be quickly loaded and ready to speed off to the next project. That’s exactly what the W 60 Ri small milling machine from Wirtgen delivers. Norwegian milling service provider Asfalt Remix - which uses exclusively W
  • New concrete construction technology at World of Concrete
    January 22, 2020
    New concrete construction technology is being unveiled at the upcoming World of Concrete exhibition in Las Vegas