Skip to main content

New system for patching roads from Bituchem

Bituchem’s FortSeal product has been applied to a countryside highway in Leicestershire to preserve and maintain the road surfacing. The FortSeal preservation product is undergoing a trial by Leicestershire County Council in the UK to assess its future potential in positively affecting the council’s road maintenance budget by prolonging the life of the county’s roads.
December 24, 2014 Read time: 3 mins
Fast road repairs are possible with the new Bituchem product

Bituchem’s FortSeal product has been applied to a countryside highway in Leicestershire to preserve and maintain the road surfacing. The FortSeal preservation product is undergoing a trial by Leicestershire County Council in the UK to assess its future potential in positively affecting the council’s road maintenance budget by prolonging the life of the county’s roads.

FortSeal is said to be a quick and effective solution for old and worn carriageways by repairing minor damage and preserving the existing asphalt against further corrosion. Forming part of the 1327 Bituchem Group’s hard landscaping materials, FortSeal increases highways’ longevity while being economically friendly.  Following on from a road preservation seminar given by Bituchem’s Phillip Humphreys and Peter Buckley, Leicestershire Council approved a trial site for the FortSeal product. With increasingly more frequent extreme weather combined with the ever decreasing council road budgets, country roads are susceptible to pot holes and cracking surfaces which pose safety hazards to road users. If these remain unrepaired the road surface disintegrates further at a rapid rate resulting in the costly process of completely replacing the road surface.

The 1.5tonnes of FortSeal was hot laid by a phoenix spray tanker at a low rate of spread to ensure an even and thorough distribution of product onto the main road that runs through the village of Burton on the Wolds. Andrew Whailing, Senior Technician at Leicestershire County Council, explained, “Councils across the UK are having to find new and innovative ways of maintaining their highway network to achieve the same high standard of roads but with reduced resources. As such the focus is on a proactive approach towards preservation of existing assets rather than reactive work such as resurfacing. The FortSeal product allows us to apply a protective coating to the entire road surface, extending the life of the road surface and any repairs previously carried out. We are very pleased with the initial application of FortSeal and will now carefully monitor its performance. If the trial suggests that FortSeal provides a cost-effective means of extending the life of the surface, then we anticipate applying it to other roads in Leicestershire.”

The preservation material works to seal the surface to prevent effects of oxidisation and ravelling which helps to stop or slow down further deterioration. FortSeal is extremely durable and can withstand the challenges that moisture, heavy snow and gritting present whilst being able to seal minor cracks in the existing asphalt surface.

By using the FortSeal system, costly and time consuming road surfacing is not necessary, allowing councils to save money ensuring the roads are maintained to a high standard. The resealing of asphalt with the FortSeal emulsion also gives a fresh, blackened look that is identical to newly laid roads, adding to the aesthetic preservation of the highways.

For more information on companies in this article

Related Content

  • Key Quebec bridge connection resurfacing contract
    August 15, 2014
    A new road surface is required for the Ile-d'Orleans Bridge in Quebec, Canada. The resurfacing work is needed just four years after the surfacing works were completed. The problem is caused by a combination of the tough winter weather and the age of the bridge, which requires the asphalt to be laid in a much thinner layer than on more recent structures. The thin layer of asphalt is vulnerable to cracking and damage and this has resulted in rapid wear due to the freeze thaw effect. The maintenance work is ex
  • Roadtec’s RT-500 trailer: integral to cold in-place recycling
    August 4, 2017
    The Roadtec RT-500 is a mobile trailer that can be pulled and fed by a Roadtec RX-900 milling machine for cold in-place recycling. But it also can be set up on site as a central cold-mix plant, according to the company, based in the US state of Tennessee. The machine features closed loop sizing with an on-board vibratory screen and horizontal shaft impact crusher. The process is designed to prevent having to pre-process RAP when the RT-500 is used as a cold-mix plant. The RT-500 also has a weigh bridge on b
  • Roadtec’s RT-500 trailer: integral to cold in-place recycling
    August 4, 2017
    The Roadtec RT-500 is a mobile trailer that can be pulled and fed by a Roadtec RX-900 milling machine for cold in-place recycling. But it also can be set up on site as a central cold-mix plant, according to the company, based in the US state of Tennessee. The machine features closed loop sizing with an on-board vibratory screen and horizontal shaft impact crusher. The process is designed to prevent having to pre-process RAP when the RT-500 is used as a cold-mix plant. The RT-500 also has a weigh bridge on b
  • Drilling efficiency
    February 20, 2012
    The latest developments in drilling rigs can help boost efficiency in quarry producion applications - Mike Woof reports