Skip to main content

Jetpatcher: patch it right first time

Jetpatcher Corporation says that its Jetpatcher Road Repair System is proven to reduce costs by up to 40 per cent when compared to traditional pothole repair methods.
By David Arminas March 3, 2023 Read time: 2 mins

 

Pothole problems are a major cause of traffic delays and vehicle damage, not to mention a cause of road accidents that may result in fatalities. For all these reasons, patching potholes should be a top priority for road agencies and local government in all countries.

But fixing potholes efficiently, cost effectively and making the repair as permanent as possible takes the best technology available, technology that has been proven to be effective.

Designed specifically to address pothole repairs, Jetpatcher Corporation says that the Jetpatcher system is a proven technology. It was developed in 1987 and over 900 units have been sold into more than 40 countries.

According to the company, the machine takes around two minutes to fix the average size pothole. Using the Jetpatcher, traffic can drive over the repair straight away and this is guaranteed to last a minimum of 12 months. As a result, customers have been able to increase the number of repairs they can carry out using limited budget.

Because it takes around half the repair time of other methods, the process uses significantly less energy than conventional alternatives. This why Jetpatcher’s philosophy is ‘right first time’.

In the first of the four-step method, operatives use the high-volume blower to blast all loose debris and water from the pothole; cleaning it and preparing the hole for an effective patch.

The Jetpatcher now coats the pothole with an asphalt emulsion which seals the area and prevents further damage from occurring due to moisture.

In the third step, as the aggregate passes through the nozzle it is coated with emulsion and sprayed into the hole or broken road edge. The Jetpatcher asphalt mix is sprayed at speeds of up to 100kph ensuring compaction is from the bottom up to create denser than rolled asphalt.

For the final step, the wet top of the repaired area can now be protected from traffic flow, using either dry aggregate sprayed from the Jetpatcher. Or for inner city work where loose chip is a potential hazard, sand from an  optional sand hopper can be built into the Jetpatcher unit.

For more information on companies in this article

Related Content

  • Brazilian contractor uses novel methods for high quality road
    January 5, 2015
    Cold-in place recycling method provides fast road rebuild in Brazil In Brazil a road contractor has carried out a high quality road rebuilding job, using novel techniques. Contractor Brown Brown is located in Santa Teresinha in the state of Bahia and recently carried out a two-week job for the company to rehabilitate sections of highway BR-381. The highway is an important route in Brazil and runs from Sao Paulo to Belo Horizonte. Highway BR-381 or Rodovia Fernão Dias, as it is called, stretches some 576km
  • Efficient asset management to trim maintenance budgets
    January 22, 2014
    Transport infrastructure is taken for granted in many, if not most, developed countries. This has resulted in a shortage of investment in maintenance, posing potential long term cost issues. In many developing nations transport networks are expanding fast, but insufficient thought is also being given to how these will be maintained.
  • Spanish contractor Sorigué has the edge with VÖGELE SprayJet
    March 21, 2016
    Spanish contractor Sorigué, the first to use the SUPER 1800-3i SprayJet from Vögele, has pioneered paving thin overlays and the development of new mixes. The company won the contract for rehabilitating the surface course of the 3km-long dam, 10m-wide promenade in the Catalonian port city of Tarragona. Sorigué’s idea was to overlay the existing surfacing with a thin layer applied to a spray seal of polymer-modified bitumen. The spray seal prevents water penetrating inside the structure – a major advant
  • The elixir ReLIXIR from Sripath Technologies
    February 22, 2022
    ReLIXIR rejuvenator is a low-viscosity, free-flowing blend of bio-based oils that can easily be pumped from tote or bulk tank into the bitumen tank, injected into the bitumen feed line to a drum or batch plant or directly onto RAP particles on a conveyor.