Skip to main content

Jetpatcher: patch it right first time

Jetpatcher Corporation says that its Jetpatcher Road Repair System is proven to reduce costs by up to 40 per cent when compared to traditional pothole repair methods.
By David Arminas March 3, 2023 Read time: 2 mins

 

Pothole problems are a major cause of traffic delays and vehicle damage, not to mention a cause of road accidents that may result in fatalities. For all these reasons, patching potholes should be a top priority for road agencies and local government in all countries.

But fixing potholes efficiently, cost effectively and making the repair as permanent as possible takes the best technology available, technology that has been proven to be effective.

Designed specifically to address pothole repairs, Jetpatcher Corporation says that the Jetpatcher system is a proven technology. It was developed in 1987 and over 900 units have been sold into more than 40 countries.

According to the company, the machine takes around two minutes to fix the average size pothole. Using the Jetpatcher, traffic can drive over the repair straight away and this is guaranteed to last a minimum of 12 months. As a result, customers have been able to increase the number of repairs they can carry out using limited budget.

Because it takes around half the repair time of other methods, the process uses significantly less energy than conventional alternatives. This why Jetpatcher’s philosophy is ‘right first time’.

In the first of the four-step method, operatives use the high-volume blower to blast all loose debris and water from the pothole; cleaning it and preparing the hole for an effective patch.

The Jetpatcher now coats the pothole with an asphalt emulsion which seals the area and prevents further damage from occurring due to moisture.

In the third step, as the aggregate passes through the nozzle it is coated with emulsion and sprayed into the hole or broken road edge. The Jetpatcher asphalt mix is sprayed at speeds of up to 100kph ensuring compaction is from the bottom up to create denser than rolled asphalt.

For the final step, the wet top of the repaired area can now be protected from traffic flow, using either dry aggregate sprayed from the Jetpatcher. Or for inner city work where loose chip is a potential hazard, sand from an  optional sand hopper can be built into the Jetpatcher unit.

For more information on companies in this article

Related Content

  • Ciber discusses optimizing asphalt mixes
    December 19, 2017
    A good quality mix plays an important role in road construction and the asphalt manufacturing process starts with the mix design in the laboratory, which takes place under controlled conditions and depends on the materials available locally. A mix design that matches the plant's limitations has a higher probability of success. The properties of the aggregates, such as water absorption, abrasiveness, and the equivalent sand index, may influence the quality of the mix produced in the plant. In the laboratory
  • “Record” cash for filling English potholes
    March 25, 2025
    The transport secretary also unveiled funding for 2025-26 for National Highways, the English road agency, to deliver critical road schemes and maintain motorways and critical major A-roads.
  • The role of anti-stripping agents in asphalt performance
    November 25, 2016
    Anti-stripping agents are often overlooked when boosting the performance of asphalt, according to Italian road chemicals producer Iterchimica
  • Brine spraying can boost winter road safety and cut materials costs
    February 16, 2015
    A study on the use of a brine sprayer on the A8 Autobahn in Germany has yielded valuable data - *Jo Rommeswinkel writes. Since 2007, Autobahnplus Services (a+S) has been providing the operation and maintenance services on the 52km concession Autobahn A8 between Munich and Augsburg in Bavaria, a region renowned for its severe winter maintenance conditions. The Munich Augsburg section comprises 48km of six-lane dual carriageway and 4km of four-lane dual carriageway. Part of the road surface consists of low-no