Skip to main content

Jetpatcher: patch it right first time

Jetpatcher Corporation says that its Jetpatcher Road Repair System is proven to reduce costs by up to 40 per cent when compared to traditional pothole repair methods.
By David Arminas March 3, 2023 Read time: 2 mins

 

Pothole problems are a major cause of traffic delays and vehicle damage, not to mention a cause of road accidents that may result in fatalities. For all these reasons, patching potholes should be a top priority for road agencies and local government in all countries.

But fixing potholes efficiently, cost effectively and making the repair as permanent as possible takes the best technology available, technology that has been proven to be effective.

Designed specifically to address pothole repairs, Jetpatcher Corporation says that the Jetpatcher system is a proven technology. It was developed in 1987 and over 900 units have been sold into more than 40 countries.

According to the company, the machine takes around two minutes to fix the average size pothole. Using the Jetpatcher, traffic can drive over the repair straight away and this is guaranteed to last a minimum of 12 months. As a result, customers have been able to increase the number of repairs they can carry out using limited budget.

Because it takes around half the repair time of other methods, the process uses significantly less energy than conventional alternatives. This why Jetpatcher’s philosophy is ‘right first time’.

In the first of the four-step method, operatives use the high-volume blower to blast all loose debris and water from the pothole; cleaning it and preparing the hole for an effective patch.

The Jetpatcher now coats the pothole with an asphalt emulsion which seals the area and prevents further damage from occurring due to moisture.

In the third step, as the aggregate passes through the nozzle it is coated with emulsion and sprayed into the hole or broken road edge. The Jetpatcher asphalt mix is sprayed at speeds of up to 100kph ensuring compaction is from the bottom up to create denser than rolled asphalt.

For the final step, the wet top of the repaired area can now be protected from traffic flow, using either dry aggregate sprayed from the Jetpatcher. Or for inner city work where loose chip is a potential hazard, sand from an  optional sand hopper can be built into the Jetpatcher unit.

For more information on companies in this article

Related Content

  • Cost effective road maintenance
    February 8, 2012
    Highway maintenance and repair is an easy target for cuts in highway budgets, but there are cost-effective measures that can be adopted as Patrick Smith reports. Road maintenance is an increasingly important industry that spans a worldwide market. Awareness of the need for a stable and sustainable international infrastructure, maintenance and creative rural road technologies are taking a stronger role as viable sources for a cost-effective means of preserving, developing and prolonging the life of roads wit
  • Seal of approval
    August 2, 2012
    Timely maintenance using proven cost-effective methods can extend the life of a highway by many years as Patrick smith reports Highways are expensive assets to construct, and the wear and tear of modern traffic means that regular maintenance will delay costly repairs or in extreme cases reconstruction. There are a number of methods of carrying out such maintenance, and these include the use of slurry seals and micro-surfacing, which are cold mixed asphalt which is a mixture of graded aggregate, asphalt emul
  • Iterchimica trials more Gipave in Oxfordshire
    November 23, 2023
    Another trial of Iterchimica’s graphene-enhanced Gipave technology gets underway in the English county of of Oxfordshire.
  • Cost effective road maintenance
    February 7, 2012
    Highway maintenance and repair is an easy target for cuts in highway budgets, but there are cost-effective measures that can be adopted as Patrick Smith reports