Skip to main content

Hitachi debuts its hybrid hydraulic excavator ZH210-6 in Europe

The ZH210-6 was presented by the Hitachi official Belgium dealer Luyckx at the recent Matexpo biennial trade fair in the Kortrijk Xpo centre. Kortrijk Xpo, in the West Flanders city of Kortrijk, is one of the country’s largest indoor exposition arenas. Hitachi said that the ZH210-6 has the lowest ever fuel consumption for a Hitachi medium hydraulic excavator. It has an advanced hydraulic system and a new lightweight arm.
November 14, 2017 Read time: 3 mins
Compared with the previous ZH-5 hybrid model, the ZH210-6 uses 12% less fuel
The ZH210-6 was presented by the 233 Hitachi official Belgium dealer Luyckx at the recent Matexpo biennial trade fair in the Kortrijk Xpo centre.


Kortrijk Xpo, in the West Flanders city of Kortrijk, is one of the country’s largest indoor exposition arenas. Hitachi said that the ZH210-6 has the lowest ever fuel consumption for a Hitachi medium hydraulic excavator. It has an advanced hydraulic system and a new lightweight arm.

Compared with the previous ZH-5 hybrid model, it uses 12% less fuel - in both PWR and ECO mode - and compared with the standard ZX210-6, it offers a 20% fuel saving. The new power unit of the ZH210-6 consists of a 73kW diesel engine (smaller than the ZH210-5) and 44kW electric power assist motor to significant reduce fuel consumption.

The diesel engine output alone is sufficient for ordinary operation, and when maximum power is required for heavy workloads, the electric power assist motor can also be used. This makes the new hybrid model more efficient than the ZH210-5 and the standard ZX210-6

The new integrated power unit led to the adoption of a new electrical storage device for the ZH210-6. Instead of the capacitor of the ZH210-5, the new model is equipped with a large-capacity lithium-ion battery developed by Hitachi Automotive Systems. Hitachi said that this has significantly increased continuous output to the electric power assist motor, which means it is able to support the engine power considerably and for a longer period.

During light operation, the electric power assist motor acts as a generator and charges the lithium-ion battery unit, similar to the way it works in a hybrid car.

A further update from the previous model is an enhanced version of the hydraulic TRIAS-HX II system. The hydraulic electric swing has also been improved, with an electric motor torque maximum of 220Nm, compared with 160Nm on the ZH210-5.

Unlike the standard Zaxis-6 hydraulic excavators, the ZH210-6 does not use SCR (selective catalytic reduction) technology, which means fewer additional costs for owners, as AdBlue is not required.

Instead the new model complies with Stage IV standards by incorporating an advanced diesel oxidation catalyst (DOC) and diesel particulate filter (DPF).

The arm of the ZH210-6 hybrid hydraulic excavator is manufactured from high-tensile steel that is 15% lighter than the standard arm of both the ZH210-5 and ZX210-6.

For more information on companies in this article

Related Content

  • Twin SCR system for Deutz V6 and V8 engines
    January 6, 2017
    Deutz has adopted a dual SCR after-treatment system on its high output TCD Vee engines to meet Tier 4 final emissions standards. Using a dual SCR system, the water-cooled 90-degree V6 12litre and V8 16litre engines, with power outputs from 390-520kW, were found not to require cooled EGR, DOC or DPF technologies. Compared to a similar engine using cooled EGR, Deutz said its TCD12 and TCD16 can operate with a cooling package that is around 20-25% smaller, improving installation packaging for OEMs.
  • Twin SCR system for Deutz V6 and V8 engines
    March 6, 2014
    Deutz has adopted a dual SCR after-treatment system on its high output TCD Vee engines to meet Tier 4 final emissions standards. Using a dual SCR system, the water-cooled 90-degree V6 12litre and V8 16litre engines, with power outputs from 390-520kW, were found not to require cooled EGR, DOC or DPF technologies. Compared to a similar engine using cooled EGR, Deutz said its TCD12 and TCD16 can operate with a cooling package that is around 20-25% smaller, improving installation packaging for OEMs.
  • Hillhead-line acts for 2014 show
    July 2, 2014
    The 2014 edition of Hillhead, the three-day biennial flagship show for the quarrying, recycling and heavy construction industries, is set to welcome thousands of visitors, keen to see the latest leading equipment models alongside innovative machine and site management control technology. Guy Woodford reports on what a variety of major companies will be showcasing during this month’s show at Lafarge Tarmac’s Hillhead Quarry near Buxton in Derbyshire With around 450 UK and international suppliers of plant, eq
  • JCB installs MTU engines in its heavier excavators
    February 24, 2017
    JCB says it is boosting the fuel efficiency, productivity and performance of its heavier crawler excavators with the installation of Tier 4 Final diesel engines. The six-cylinder, 7.7litre MTU 6R1000 engine, already proven in JCB’s largest wheeled loader, will be used in the JS300 and JS330, along with the JS370, which will be on display. The diesel engine is a turbo-charged and inter-cooled power plant delivering 180kW in the JS300 and 210kW for the JS330 and JS370 models. The machines incorporat