Hitachi debuts its hybrid hydraulic excavator ZH210-6 in Europe

The ZH210-6 was presented by the Hitachi official Belgium dealer Luyckx at the recent Matexpo biennial trade fair in the Kortrijk Xpo centre. Kortrijk Xpo, in the West Flanders city of Kortrijk, is one of the country’s largest indoor exposition arenas. Hitachi said that the ZH210-6 has the lowest ever fuel consumption for a Hitachi medium hydraulic excavator. It has an advanced hydraulic system and a new lightweight arm.
November 14, 2017 Read time: 3 mins
Compared with the previous ZH-5 hybrid model, the ZH210-6 uses 12% less fuel
The ZH210-6 was presented by the 233 Hitachi official Belgium dealer Luyckx at the recent Matexpo biennial trade fair in the Kortrijk Xpo centre.


Kortrijk Xpo, in the West Flanders city of Kortrijk, is one of the country’s largest indoor exposition arenas. Hitachi said that the ZH210-6 has the lowest ever fuel consumption for a Hitachi medium hydraulic excavator. It has an advanced hydraulic system and a new lightweight arm.

Compared with the previous ZH-5 hybrid model, it uses 12% less fuel - in both PWR and ECO mode - and compared with the standard ZX210-6, it offers a 20% fuel saving. The new power unit of the ZH210-6 consists of a 73kW diesel engine (smaller than the ZH210-5) and 44kW electric power assist motor to significant reduce fuel consumption.

The diesel engine output alone is sufficient for ordinary operation, and when maximum power is required for heavy workloads, the electric power assist motor can also be used. This makes the new hybrid model more efficient than the ZH210-5 and the standard ZX210-6

The new integrated power unit led to the adoption of a new electrical storage device for the ZH210-6. Instead of the capacitor of the ZH210-5, the new model is equipped with a large-capacity lithium-ion battery developed by Hitachi Automotive Systems. Hitachi said that this has significantly increased continuous output to the electric power assist motor, which means it is able to support the engine power considerably and for a longer period.

During light operation, the electric power assist motor acts as a generator and charges the lithium-ion battery unit, similar to the way it works in a hybrid car.

A further update from the previous model is an enhanced version of the hydraulic TRIAS-HX II system. The hydraulic electric swing has also been improved, with an electric motor torque maximum of 220Nm, compared with 160Nm on the ZH210-5.

Unlike the standard Zaxis-6 hydraulic excavators, the ZH210-6 does not use SCR (selective catalytic reduction) technology, which means fewer additional costs for owners, as AdBlue is not required.

Instead the new model complies with Stage IV standards by incorporating an advanced diesel oxidation catalyst (DOC) and diesel particulate filter (DPF).

The arm of the ZH210-6 hybrid hydraulic excavator is manufactured from high-tensile steel that is 15% lighter than the standard arm of both the ZH210-5 and ZX210-6.

Maintenance

For more information on companies in this article

Related Content

  • Advanced, clean and efficient engines from DEUTZ
    November 21, 2014
    DEUTZ is exhibiting new products at Bauma China 2014, being launched together with its Chinese joint venture DEUTZ (Dalian) Engine (DDE). The partners are launching engines designed to comply with the new third Chinese emissions standard (China Stage III), which comes into effect in October 2015 and is the equivalent of the EU Stage IIIA. A key product being introduced is the TCD 2013 L6 2V, which offers power outputs of up to 200kW and torque of up to 1,100Nm. This engine suits use in 5tonne capacity whe
    Read More
  • Advanced, clean and efficient engines from DEUTZ
    January 6, 2017
    DEUTZ is exhibiting new products at Bauma China 2014, being launched together with its Chinese joint venture DEUTZ (Dalian) Engine (DDE). The partners are launching engines designed to comply with the new third Chinese emissions standard (China Stage III), which comes into effect in October 2015 and is the equivalent of the EU Stage IIIA. A key product being introduced is the TCD 2013 L6 2V, which offers power outputs of up to 200kW and torque of up to 1,100Nm. This engine suits use in 5tonne capacity whe
    Read More
  • Debut for Liebherr A 914 Litronic wheeled excavator
    April 9, 2018
    Liebherr’s Stage IV/Tier 4 emission standards-compliant A 914 Litronic wheeled excavator, at a trade show for the first time, has an operating weight of between 14.9-17.2tonnes. Powered by a Liebherr D924 diesel engine, producing 105kW, the SCR system, which consists of an SCR catalyst system and other components such as an injector and AdBlue solution, is said to bring about a 91% reduction in nitrogen oxide (NOX). A particulate filter is not required but can be installed as an addition for special
    Read More
  • Hitachi’s new high production ZX870LCH-5 excavator
    February 8, 2013
    With an operating weight of 83.8 – 86tonnes, Hitachi’s giant ZX870LCH-5 excavator is said to be built to operate on the most demanding job sites, such as large-scale construction projects and in busy quarries. The model incorporates the HIOS IIIB hydraulic system, said to allow for faster operation with lower fuel consumption and increased front speed. The ZX870LCH-5 is claimed to have 6% more productivity in H/P mode compared to the previous Zaxis model. Swing torque is also said to have increased by 9% an
    Read More

Highlighted Content