Big jobs for the Atlas 140 W ‘bigfoot’ all terrain excavator

The ATLAS 140 W is equipped with huge 710/45-26.5 20 PR tyres and an undercarriage developed for working on marshy wet ground. The 140 W also has a speed of 30kph on roads and pathways so it can be used for all types of jobs on both difficult wet terrain and on the road,” said Frank König, employee of the local authority maintenance association Untere Oste, based in Hemmoor, a small town in northern Germany. The association maintains nearly 600km of waterways, pumping stations, polder and barrage pumping
January 17, 2018 Read time: 2 mins
“Bigfoot” with the big feet is the Atlas 140 W all-terrain excavator

The ATLAS 140 W is equipped with huge 710/45-26.5 20 PR tyres and an undercarriage developed for working on marshy wet ground.

The 140 W also has a speed of 30kph on roads and pathways so it can be used for all types of jobs on both difficult wet terrain and on the road,” said Frank König, employee of the local authority maintenance association Untere Oste, based in Hemmoor, a small town in northern Germany.

The association maintains nearly 600km of waterways, pumping stations, polder and barrage pumping stations, sluices, culverts and various earthslides and bed pitches.

In order to generate extremely low ground pressure, 7985 Atlas chose ultra-wide tyres with dimensions of 710/45-26.5 20 PR and designed the undercarriage to not restrict any operating movements. Bigfoot features enormous ground clearance and a low ground contact pressure without, however, exceeding an overall height of 4m.

To travel over the ground as lightly as possible, the axles have a limited slip differential of 35%, which prevents wheel spin and the excavator from getting bogged down in muddy or marshy ground.

With an optional second jib, the reach is 11m at which it still lifts loads of 1.2tonnes without the need for stabilisers.

Power is supplied by a 4-cylinder 201 Deutz engine with 80kW of power and diesel particle filter. The machine is equipped with a load sensing high-performance piston pump which controls various work movements simultaneously and independent of each other.

There is an attachment kit for up to 10 hydraulic tools, including hydraulic hammer and vibration pile driver, all of which can be controlled from cab. The hydraulic system was adapted to ensure consistent pressure and oil supply for powered units like mowers or mulchers and to keep the wear of the tools at a minimum.

During mowing operations with an oil flow of 26litres/min and a constant pressure of 180bar, none of the tools’ movements will cause a loss of performance. Average engine speed is 1,480rpm, which means that it consumes less than 6.3liters of fuel per hour.

Maintenance

For more information on companies in this article

Related Content

  • New heavy lift crawler crane from Sany
    January 31, 2013
    Sany America is offering a new 500 tonne class crawler crane aimed to fill a gap in its range that suits duties in infrastructure projects. The Sany SCC8500 is well-suited for construction of 100m wind towers and placing 2.5MW nacelles. The SCC8500 can make these lifts with a straight boom and an offset wind tip, with no need for a back mast. With a full complement of attachments and options, including fixed jib, luffing jib and the SANY UltraLift package, the SCC8500 can also be used in infrastructure proj
    Read More
  • Automated operation boosts productivity on Atlas Copco’s new SmartRig
    February 24, 2012
    Automated operation is said to boost productivity for Atlas Copco's new ROC F9C SmartRig. This innovative machine allows operators to lay out shot patterns on a computer and can help them follow through with GPS-guided, automated drilling for higher accuracy and speed. Documentation of performance is kept for better planning and accountability and the ROC F9C rock drill can adjust impact power and feed pressure to suit rock conditions, for smoother drilling and reduced stress on the drill string.
    Read More
  • Brisbane’s Airport: Innovative Management of One of the World’s Busiest Runways
    June 26, 2014
    When it comes to runways, there are few busier then Brisbane’s main runway. Servicing both domestic and international travel, with over 200,000 movements per year, operating without a curfew Brisbane’s main runway is the busiest in Australia. For maintenance, crews only have a limited period of time to determine the pavement condition, normally during the night, making the detection of pavement faults difficult. To resolve this issue, a new high speed pavement scanner was used to rapidly survey the pavem
    Read More
  • Innovations in compact construction machines
    February 15, 2012
    2011 has already seen a host of new machine introductions among compact equipment makers, and we take a look at some of them in the utility sector With emissions legislation dominating the introduction of new machines over 130kW, smaller equipment has not been overlooked. Most firms have been working feverishly to produce quieter, more economical and more productive equipment and Japanese maker Takeuchi is a good example, having recently introduced a new 8.5 tonne midi excavator.
    Read More

Highlighted Content