Big jobs for the Atlas 140 W ‘bigfoot’ all terrain excavator

The ATLAS 140 W is equipped with huge 710/45-26.5 20 PR tyres and an undercarriage developed for working on marshy wet ground. The 140 W also has a speed of 30kph on roads and pathways so it can be used for all types of jobs on both difficult wet terrain and on the road,” said Frank König, employee of the local authority maintenance association Untere Oste, based in Hemmoor, a small town in northern Germany. The association maintains nearly 600km of waterways, pumping stations, polder and barrage pumping
January 17, 2018 Read time: 2 mins
“Bigfoot” with the big feet is the Atlas 140 W all-terrain excavator

The ATLAS 140 W is equipped with huge 710/45-26.5 20 PR tyres and an undercarriage developed for working on marshy wet ground.

The 140 W also has a speed of 30kph on roads and pathways so it can be used for all types of jobs on both difficult wet terrain and on the road,” said Frank König, employee of the local authority maintenance association Untere Oste, based in Hemmoor, a small town in northern Germany.

The association maintains nearly 600km of waterways, pumping stations, polder and barrage pumping stations, sluices, culverts and various earthslides and bed pitches.

In order to generate extremely low ground pressure, 7985 Atlas chose ultra-wide tyres with dimensions of 710/45-26.5 20 PR and designed the undercarriage to not restrict any operating movements. Bigfoot features enormous ground clearance and a low ground contact pressure without, however, exceeding an overall height of 4m.

To travel over the ground as lightly as possible, the axles have a limited slip differential of 35%, which prevents wheel spin and the excavator from getting bogged down in muddy or marshy ground.

With an optional second jib, the reach is 11m at which it still lifts loads of 1.2tonnes without the need for stabilisers.

Power is supplied by a 4-cylinder 201 Deutz engine with 80kW of power and diesel particle filter. The machine is equipped with a load sensing high-performance piston pump which controls various work movements simultaneously and independent of each other.

There is an attachment kit for up to 10 hydraulic tools, including hydraulic hammer and vibration pile driver, all of which can be controlled from cab. The hydraulic system was adapted to ensure consistent pressure and oil supply for powered units like mowers or mulchers and to keep the wear of the tools at a minimum.

During mowing operations with an oil flow of 26litres/min and a constant pressure of 180bar, none of the tools’ movements will cause a loss of performance. Average engine speed is 1,480rpm, which means that it consumes less than 6.3liters of fuel per hour.

Maintenance

For more information on companies in this article

Related Content

  • Caterpillar refines F-Series wheel excavators and material handlers
    February 9, 2017
    Caterpillar says that for 2017 it has further refined its F-Series wheeled excavators – from the M314F to the M322F - and wheeled material handlers MH3022 and MH3024. The M314F and M316F wheeled excavators are fitted with the Cat C4.4 ACERT engine while the M318F, M320F, and M322F use the C7.1 ACERT engine. New for these machines is a system that adjusts engine speed to match speed demands during travels. The system provides the exact level of power required for varying road situations, resulting in redu
    Read More
  • New engine options for Atlas Copco and Hitachi
    December 17, 2014
    Both Atlas Copco and Hitachi have selected new low emission engines for some of their latest machines being made available in Europe and North America. For Atlas Copco, this has seen the firm installing diesels from John Deere Power Systems to drive a number of its new air compressors. Meanwhile Hitachi is now installing Deutz diesels in a number of its new wheeled loaders. The John Deere PowerTech Tier 4 Final /Stage IV engines will power three new air compressors from Atlas Copco. The Atlas Copco XAS 7
    Read More
  • High performance, high mobility of wheeled pavers
    February 14, 2012
    New generation wheeled pavers aimed at use in territories such as the UK, Italy, South Africa and Southern Germany are now coming to market. Pavers in these countries are often expected to be driven from one part of a site to another or for short distances, which is why the additional mobility of the wheeled machine is preferred in many instances over similarly-sized tracked models. This preference for wheeled units comes in spite of the greater stability offered by tracked machines. BOMAG, Caterpillar and
    Read More
  • Tobroco boosts the specs on its Giant D337T X-TRA loader
    October 26, 2017
    Tobroco, a Dutch compact wheeled loader manufacturer, reports that its Giant D337 model is now available with higher specifications, the X-TRA version. The D337T X-TRA loader has a lower front frame making for a lower centre of gravity and an increased lifting capacity. The machine has a tipping load of 2,054kg in comparison with 1,450kg for the standard model. The new wheeled loader has a 24.6kW 3-cylinder Kubota diesel engine and comes with a hydraulic pump from Bosch Rexroth.
    Read More

Highlighted Content