Skip to main content

India’s massive demand for construction machines

India is the new focus for the world construction industry market. In 2015 there was a change in perspective in Asia, with demand for machines in China dropping in terms of construction growth. India posted growth of 5.3% during 2015, while China achieved growth of 4%. This change at the top has been confirmed by the SaMoTer-Verona Outlook. This is a construction sector observatory group set up in partnership with Prometeia, the international economic consulting and research firm, with the support of Una
June 17, 2016 Read time: 3 mins
India is the new focus for the world construction industry market. In 2015 there was a change in perspective in Asia, with demand for machines in China dropping in terms of construction growth. India posted growth of 5.3% during 2015, while China achieved growth of 4%.

This change at the top has been confirmed by the 323 SaMoTer-Verona Outlook. This is a construction sector observatory group set up in partnership with Prometeia, the international economic consulting and research firm, with the support of Unacea, the Italian Association of construction machinery and equipment manufacturers.

The overall results for 2015 highlight a slight upturn on the North American (+2.5%), Western European (+1.1%) and Japanese (+0.6%) markets as well as the continuing recession in Latin America (-2.6%) and Eastern Europe (-0.7%). The centre of gravity for the construction market over the last 15 years has gradually shifted eastwards, with the proportion of global investments covered by advanced countries down from 70% to 43% in favour of India and China.

The favourable period for the United States also continued in the first quarter of 2016: the USA is also expanding commercial construction (+10.8%) and especially roadworks (+14.9%). Europe in the first quarter of 2016 saw a strong recovery in investments in Germany (+2.3%), a slow resumption of the construction cycle in France (+0.4%) and continued decline in the United Kingdom (-0.5%) and Spain (-0.2%).

As regards the construction scenario in Italy, the slight downturn (-0.5%) posted in the first quarter of 2016 should not affect the overall recovery that began in 2015. According to estimates by Prometeia, 2016 will close with an increase of 1.6% and 2017 of 1.9% over the figures for 2015.

These are important signals with a view to the upcoming 30th SaMoTer (22-25 February 2017), Veronafiere’s triennial event dedicated to the construction machinery sector co-located with Asphaltica, the exhibition focusing on technologies and solutions for road paving, safety and road infrastructure.

As part of the construction sector, the world market for earth moving machines closed 2015 with 628,000 units sold, down by 14% compared to 2014. This negative result was especially the outcome of the sharp 24% drop posted in the last quarter of 2015. The SaMoTer-Veronafiere Outlook shows that the types of machinery in demand on construction sites are also changing: in five years, crawler excavators have dropped from 33% to 24% of total sales, while mini-excavators have improved from 15% to 24%.

The geographical balance between market shares also changed between 2010 and 2015: North America doubled its share (from 14% to 28%), China saw a downturn from 35% to 12%, while Western Europe managed to improve from 15% to 20% of total.

The climate of uncertainty also persisted in the first quarter of 2016, with 168,000 earth moving machines sold on a global scale, 4,000 less (-2.5%) than in the same period in 2014.

From January to March, of all types of machinery only mini-excavators (+8%) and skid-steer loaders (+5%) went against the general downward trend in demand.

In terms of geographical macro-areas, excellent sales results were seen in India (+28%), Western Europe (+11%) and Turkey (+37%) that became the leading central-eastern European market. China resumed growth again (+5%), while the first quarter closed on a negative note in North America (-3%), Russia (-21%) and Latin America (-40%).

For more information on companies in this article

Related Content

  • Samoter organisers bullish for next event
    October 7, 2019
    The organisers of the upcoming Samoter construction machinery show are bullish about the 2020 event. According to the show organisers, registrations are up 39% and bookings up 66% from the previous event. Liebherr and Wacker Neuson return after the last attending the trade fair in 2011. Confirmations have also been received from Bobcat, Doosan, Eurocomach, Hidromek, Hyundai, Komatsu, Sany, Takeuchi, Venieri and Yanmar The event, the 31st Samoter exhibition, is benefiting from larger show areas in the hal
  • Europe and Americas drive increase in Volvo Construction Equipment sales
    July 21, 2021
    Volvo Construction Equipment increased year-on-year net sales by 13% in Q2, driven by higher volumes in Europe, North America and South America.
  • Wacker Neuson reports record revenue
    May 11, 2017
    Wacker Neuson is reporting a record revenue for its first quarter in 2017. The Munich-based international light and compact equipment manufacturer said that adjusted profit before interest and tax (EBIT) increased significantly. At the close of the first quarter, order intake and backlog showed a clear rise over the figures posted for the prior-year period. "The year has got off to a very promising start for our Group. The investment mood among many national and international customers in most of our target
  • Volvo CE benefits from strong sales of construction machines
    July 18, 2019
    Volvo CE reports strong financial performance on the back of healthy sales. The firm says that improvements in the key European and North American markets, coupled with a strong focus on its service business, volume flexibility in the industrial system and tight cost control have helped the company to deliver a good all round performance in its second quarter 2019 results. Net sales in the second quarter increased by 10%, amounting to SEK 26.814 billion, compared with SEK 24.403 billion in Q2 2018. Operati