Skip to main content

India’s massive demand for construction machines

India is the new focus for the world construction industry market. In 2015 there was a change in perspective in Asia, with demand for machines in China dropping in terms of construction growth. India posted growth of 5.3% during 2015, while China achieved growth of 4%. This change at the top has been confirmed by the SaMoTer-Verona Outlook. This is a construction sector observatory group set up in partnership with Prometeia, the international economic consulting and research firm, with the support of Una
June 17, 2016 Read time: 3 mins
India is the new focus for the world construction industry market. In 2015 there was a change in perspective in Asia, with demand for machines in China dropping in terms of construction growth. India posted growth of 5.3% during 2015, while China achieved growth of 4%.

This change at the top has been confirmed by the 323 SaMoTer-Verona Outlook. This is a construction sector observatory group set up in partnership with Prometeia, the international economic consulting and research firm, with the support of Unacea, the Italian Association of construction machinery and equipment manufacturers.

The overall results for 2015 highlight a slight upturn on the North American (+2.5%), Western European (+1.1%) and Japanese (+0.6%) markets as well as the continuing recession in Latin America (-2.6%) and Eastern Europe (-0.7%). The centre of gravity for the construction market over the last 15 years has gradually shifted eastwards, with the proportion of global investments covered by advanced countries down from 70% to 43% in favour of India and China.

The favourable period for the United States also continued in the first quarter of 2016: the USA is also expanding commercial construction (+10.8%) and especially roadworks (+14.9%). Europe in the first quarter of 2016 saw a strong recovery in investments in Germany (+2.3%), a slow resumption of the construction cycle in France (+0.4%) and continued decline in the United Kingdom (-0.5%) and Spain (-0.2%).

As regards the construction scenario in Italy, the slight downturn (-0.5%) posted in the first quarter of 2016 should not affect the overall recovery that began in 2015. According to estimates by Prometeia, 2016 will close with an increase of 1.6% and 2017 of 1.9% over the figures for 2015.

These are important signals with a view to the upcoming 30th SaMoTer (22-25 February 2017), Veronafiere’s triennial event dedicated to the construction machinery sector co-located with Asphaltica, the exhibition focusing on technologies and solutions for road paving, safety and road infrastructure.

As part of the construction sector, the world market for earth moving machines closed 2015 with 628,000 units sold, down by 14% compared to 2014. This negative result was especially the outcome of the sharp 24% drop posted in the last quarter of 2015. The SaMoTer-Veronafiere Outlook shows that the types of machinery in demand on construction sites are also changing: in five years, crawler excavators have dropped from 33% to 24% of total sales, while mini-excavators have improved from 15% to 24%.

The geographical balance between market shares also changed between 2010 and 2015: North America doubled its share (from 14% to 28%), China saw a downturn from 35% to 12%, while Western Europe managed to improve from 15% to 20% of total.

The climate of uncertainty also persisted in the first quarter of 2016, with 168,000 earth moving machines sold on a global scale, 4,000 less (-2.5%) than in the same period in 2014.

From January to March, of all types of machinery only mini-excavators (+8%) and skid-steer loaders (+5%) went against the general downward trend in demand.

In terms of geographical macro-areas, excellent sales results were seen in India (+28%), Western Europe (+11%) and Turkey (+37%) that became the leading central-eastern European market. China resumed growth again (+5%), while the first quarter closed on a negative note in North America (-3%), Russia (-21%) and Latin America (-40%).

For more information on companies in this article

Related Content

  • Wacker Neuson remains on growth path in Q3
    November 14, 2014
    Wacker Neuson Group reported a significant rise in revenue and profit for the third quarter of 2014 with especially high performance in the Americas and Asia-Pacific. Sales of light and compact equipment were driven primarily by an upturn in business in North America where the Munich-based group is planning its first production line for compact equipment. All regions contributed to revenue growth in the third quarter of 2014. Europe reported a 14% increase while the Americas and Asia-Pacific both saw reve
  • US machine manufacturers hit hard by global downturn in construction
    November 30, 2015
    The latest report from the US-based Association of Equipment Manufacturers, AEM, makes for sobering reading. For the first six months of 2015, US exports of construction equipment dropped by 17% compared with the same period in 2014. The US manufacturers have been hit doubly, first by a tough international market and secondly by the high value of the US Dollar.
  • Liebherr posts €8.963.6bn 2013 turnover amid big production site investment
    June 16, 2014
    The Liebherr Group achieved turnover of €8.963.6 billion in 2013 – down 1.4% (€126.6 million) on 2012. The group said the full business year figure was posted against a backdrop of “moderate” international economic progress, with 2013 also seeing €830 million invested by the group in production facilities and its sales and service network. The Liebherr Group’s global workforce also rose again last year by 4% (1,623) to 39,424. In the construction machinery and mining area, turnover in 2013 reached €5,630
  • European construction machine sales remain strong
    March 3, 2023
    European construction machine sales are remaining strong.