Skip to main content

Highways England to upgrade Winchester M3 junction

Highways England has unveiled plans to upgrade to one of the busiest motorway junctions in southern England near the town Winchester. Under the plans, junction 9 - the Winchester junction where the M3 interchanges with the A34 trunk road - will be redesigned to create dedicated free flow lanes. This goal is to allow drivers travelling between the M3 and the A34 to travel freely between the two roads to avoid using the junction roundabout. The M3 is the main road between London and the Solent Ports or
July 5, 2019 Read time: 2 mins
Artist impression of how the resigned junction 9 of the M3 motorway in southern England will look when complete in 2023 (courtesy Highways England)
8100 Highways England has unveiled plans to upgrade to one of the busiest motorway junctions in southern England near the town Winchester.


Under the plans, junction 9 - the Winchester junction where the M3 interchanges with the A34 trunk road - will be redesigned to create dedicated free flow lanes. This goal is to allow drivers travelling between the M3 and the A34 to travel freely between the two roads to avoid using the junction roundabout.

The M3 is the main road between London and the Solent Ports or Portsmouth and Southampton. The A34 is the main corridor between the south coast and the English Midlands region. Around 110,000 vehicles use the junction every day, including over 5,500 trucks because of the port traffic.

The roundabout itself will be redesigned into a new so-called dumbbell layout, which will increase capacity, improve safety and make journey times more reliable, according to the government-owned company.

Work will include widening the M3 from two to four lanes between the south-facing roundabout slip roads and the new free-flow links with the A34. Subways will be built through the junction to create a continuous, segregated route for pedestrians and cyclists between the South Downs National Park and the towns of Winnall and Abbots Worthy.

The plans recently went on show with the consultations running until the end of August.

“More than 6,000 vehicles use this junction each hour during peak times and making the junction free flow will stop queues backing up onto the main carriageway and reduce the risk of collisions,” said Neil Andrew, Highways England senior project manager.

“Not only will the improvements help to separate local and long-distance traffic, we are also improving access for pedestrians, cyclists and equestrians [horse riders].”

For more information on companies in this article

Related Content

  • Bertha ends her Alaskan Way voyage in Seattle
    December 21, 2017
    Seattle's State Route 99 viaduct is coming down. David Arminas was on site. Bertha, the world’s largest diameter earth pressure balance tunnel boring machine, with a cutterhead diameter of 17.5m, is no more. Her 2.7km journey underneath the waterfront area of Seattle finished on April 4 and the power went off for the last time on an extraordinary TBM that had finally completed an extraordinary job. “A small sidewalk job would have had more impact on city traffic than we have had,” says Brian Russell a v
  • Effective signage and road markings boost road safety
    February 24, 2012
    Effective signage and the use of roadmarkings in the most effective manner can reduce risks for all road users - Mike Woof writes
  • Flatiron wins Steveston work in Canada
    April 18, 2022
    The Steveston Interchange project near Vancouver is key for improving traffic flow into what will be a new immersed Massey Tunnel under the Fraser River.
  • Safer with sharrows?
    September 30, 2020
    Do bike lanes make cyclists safer? Yes and no, says John Anderson, director of technology at Smart Design*