Skip to main content

New Michelin ADT and XDT tyre range exhibited in Stockholm

Michelin’s new earthmover tyres will last longer and cope with tougher conditions - Ben Spencer reports. Better damage resistance, increased wear life and more distance in an hour are just three claims Jock Aitken, Michelin’s technical manager is making about the new range of ADT and RDT tyres. Referring to the cables used on the ADT Xtra Defend tyre (XDT) there is a 15% wear life and increased damage resistance. The XDT has 25% more steel in each cable, making it a much more damage resistant casing. Th
November 8, 2017 Read time: 4 mins
Michelin’s new construction tyres offer increased performance
Michelin’s new earthmover tyres will last longer and cope with tougher conditions - Ben Spencer reports


Better damage resistance, increased wear life and more distance in an hour are just three claims Jock Aitken, 720 Michelin’s technical manager is making about the new range of ADT and RDT tyres.

Referring to the cables used on the ADT Xtra Defend tyre (XDT) there is a 15% wear life and increased damage resistance. The XDT has 25% more steel in each cable, making it a much more damage resistant casing. The mass and the sidewall are 15% thicker than the previous one”, he explained.

He added that it is not just the tread that matters, but the amount of rubber available to be used as tread. When compared to their previous offer, the X Super Trade Plus, there is now 17% more available rubber to be used. The XDT also runs cool which means it lasts longer.

The puncture resistance is at 172mm, a 16mm difference with competitor 175 Bridgestone's VLTS puncture resistance of 156mm, which shows a 10% improvement in the damage resistance in the tread area. In short, Aitken claimed this means the XDT has an increased damage resistance and wear life with no reduction in its ability to carry a load at a distance.

“It's heavier so you’d think automatically it must be generating more heat, but we can dissipate that quickly, so it’s a cool running tyre," Aitken concluded.

Speaking about Michelin's new RDT traction offer and the first three-star tyre on the market: the Grip, and its rock offer: the Protect, Aitken explained their availability in the UK and Ireland as an A4 compound for aggressive weather conditions and how the Nordic countries use the B compound for covering longer distances.

The same casing is on both with an increase of carrying capacity and an increase in distance in an hour. "You shouldn’t be able to do that; the two should be mutually exclusive. This is a huge breakthrough for us".

Highlighting the need for excellent grip in loose conditions, Aitken said the design gives 30% greater leading edges, enabling them to dig their heels in, making it a better-suited tyre to move forward and perform as a mud plugger.

"With the previous offer, the A4 XPT, we said it could go to 18km/h. With the new tyre's three-star casing: 22km/h - an increase of a fifth. In the B compound the traction and extraction which was a B compound to 22km/h, the extra-low grip takes it to 34km/h - a 54% increase - and you can take a higher load, it's more damage resistant, and the tread will last longer."

The Xtra load grip traction offer has 17% more rubber available to be used than the previously offerred XDT. In addition, the stable contact patch leaves little movement in the contact area which means it’s going to run cool and last for a long time.

"However, this is the star of the show: the Perrota proof cables," he added. Through surrounding cables in rubber and twisting them together, you reduce damage caused by rain that causes rust and prevents the capillary action of high filaments drawing moisture, making it extremely resistant to fatal damage, and the casing more acceptable for retreading. This allows 8% more wear life and more distance in an hour."

Meanwhile, Michelin's new rock offer has 9% more available rubber to use than the previous X Quarry S and a greater 60% distance in an hour allied to a greater carrying capacity. Aitken states this means an improved TKPH because as you increase the load and you can increase the speed.

Referring to the tread pattern, the tyre is also braced underneath to form an almost continuous single block. "Because we’ve braced it so well we have a large footprint with little movement in the tread. To have that with a deeper tread and more tread rubber available and tread rubber is relatively dense and a good heat sync; that’s sort of witchcraft."

Aitken summarises that having all this and a reduction in heat leads to better damage resistance, more wear, distance, speed, and load which means increased productivity.

For more information on companies in this article

Related Content

  • Intelligent bulldozers provide productivity boost
    September 27, 2013
    New smart dozers provide faster working and greater efficiency - Mike Woof reports Both Caterpillar and Komatsu are making key moves in offering intelligent bulldozing capabilities on their latest machines. In the medium-sized bulldozer market, both companies have sophisticated new models that will increase both productivity and finish quality, while lowering running costs for the user.
  • Rubber recycling for South African roads
    November 5, 2012
    South Africa takes crumb rubber use to the next level - *Anders Marschall Jensen The preservation of the environment is a global concept, and in the road construction industry, it is all about preservation of roads. In earlier days, roads were built with the primary goal of moving passenger traffic from one place to another, but these days, roads are very different. Not only is there passenger traffic, and more of it, but roads must also deal with extensive movement of products in heavy vehicles. Therefore,
  • US highway rebuild uses hard-wearing asphalt
    July 18, 2012
    Guntert & Zimmerman equipment is being used to create a new hard-wearing asphalt surface on a key Interstate highway in the US state of Kansas as Mike Woof reports A busy Interstate highway in the US is now benefiting from a new, long-lasting surface. The road, Interstate 70 in Western Kansas, was in need of resurfacing. The full-depth asphalt roadway, up to 508mm thick in certain sections, had reached the end of its working life.
  • Wheeled loaders tackle costs, reduce emissions
    February 7, 2012
    Volvo CE says that lowering fuel consumption will tackle fleet costs and deliver environmental benefits for its customers, Mike Woof reports. Volvo Construction Equipment (Volvo CE) is targeting fuel economy and performance with its latest generation of machines. The new L180F and L220F wheeled loader models are being fitted with the sophisticated OptiShift package, which will boost operation and driveline efficiencies and cut fuel consumption by 15%, and more in some instances.