Skip to main content

New alternative to batteries for EVs

A new development looks set to offer an efficient alternative to lithium ion batteries for use in electric vehicles (EVs). At present the current generation of EVs feature lithium-ion batteries to store energy. However the performance of the lithium ion batteries has been criticised, particularly with regard to the recharge time required as this is considerably longer than the time needed to refuel a combustion engine-powered vehicle. While faster charging technologies are available for lithium ion batterie
November 15, 2013 Read time: 3 mins
A new development looks set to offer an efficient alternative to lithium ion batteries for use in electric vehicles (EVs). At present the current generation of EVs feature lithium-ion batteries to store energy. However the performance of the lithium ion batteries has been criticised, particularly with regard to the recharge time required as this is considerably longer than the time needed to refuel a combustion engine-powered vehicle. While faster charging technologies are available for lithium ion batteries, these reduce battery life considerably. The charging time has been identified as a major reason for the slow adoption rate of EVs around the world. However a team of engineers is working on a novel solution by developing a graphene supercapacitor that can store almost as much charge as a lithium ion battery but charges in just 16 seconds.

This new capacitor is being developed at the Gwangju Institute of Science and Technology in South Korea. The team’s high-performance supercapacitors use graphene and are said to store almost as much energy as a lithium-ion battery. In terms of practicality, they can charge and discharge in seconds, and maintain 98% of their initial value after 10,000 cycles.

The project is using a highly porous form of graphene that has a very large internal surface area. This material is produced by reducing graphene oxide particles with hydrazine in water agitated with ultrasound. The graphene powder is then packed into a coin-shaped cell, a pressure of 300kg/cm2 for five hours and dried at 140°C. The resulting graphene electrode is highly porous, which allows the electrode to accommodate much more electrolyte. And this determines the amount of charge the supercapacitor can hold. The team has measured the performance of the supercapacitor and it is said to store energy at a density of more than 64Wh/kg at a current density of 5A/gramme. That is almost comparable with lithium-ion batteries, which have an energy density of between 100 and 200Wh/kg.

The engineers say they can fully charge the supercapacitor in just 16 seconds and have repeated this some 10,000 times without a significant reduction in capacitance. This is significant as it also offers a practical alternative to the more limited working life of a lithium ion battery. The cost of the supercapacitor technology has not yet been revealed however.

Related Content

  • Taiwan developing its own EV technology
    April 26, 2012
    Taiwan’s electric vehicle (EV) industry is moving from parts manufacturing to marketing own brands, with the island’s solid base in information and communication technology (ICT) helping it to make its name on the EV stage. Taiwan is also working vigorously to develop its own EV technology, placing it among countries like Brazil.
  • Subaru’s launches ER12 Rammer Engine
    August 27, 2013
    Subaru’s new ER12 Rammer Engine is said to feature a carefully balanced and engineered design, and is exclusively intended for the demanding application of rammers. With specially-designed components and overhead cam (OHC) technology, the 3hp, four-stroke engine is lightweight, yet rugged and powerful. Weighing in at around 9.07kg, the ER12 is said to offer more power and up to 24% more output than similar competitive engines, all while being lighter in weight and designed for optimised balance and perfo
  • FPT goes high-power with V20 power unit
    March 9, 2017
    FPT Industrial revealed an all-new range-topping power unit at CONEXPO-CON/AGG. It is called the V20 as a reference to its 20litre capacity, and the new power unit sits above the previous flagship, the inline six-cylinder Cursor 16. V20 packs a punch from its V8 architecture, with up to 680kW of power available from 1600-1800rpm, and 4100Nm of torque at 1500rpm. FPT said the V20 is currently the most compact engine of its category, which it sees as a viable alternative for much larger V12 units that offer
  • Chinese firms unveiled earthmoving innovation at BICES 2015
    January 15, 2016
    Chinese firms LiuGong, Shantui, Sunward and XCMG revealed innovative earthmoving concepts at BICES 2015 – Mike Woof writes. Of the many new machines seen at the recent BICES 2015 construction equipment exhibition in Beijing, a number of firms were notable for their innovations. LiuGong, Shantui, Sunward and XCMG all offered particular developments in earthmoving technology that stood out from the array of more conventional equipment. All of these firms also showed more standard machines, as did other rivals