Skip to main content

Researching vehicle tyre safety

For the last two years a team of European partners has been examining the interaction between vehicle tyres and road surfaces. According to the UK's TRL, one of the partners in the European project Tyrosafe (Tyre and Road Surface Optimisation for Skid resistance And Further Effects), devices to measure skid resistance were developed at the forerunner of the UK's TRL in the 1930s.
February 15, 2012 Read time: 3 mins
The European Tyrosafe project has been examining the interaction between vehicle tyres and road surfaces
For the last two years a team of European partners has been examining the interaction between vehicle tyres and road surfaces.

According to the UK's 777 TRL, one of the partners in the European project Tyrosafe (Tyre and Road Surface Optimisation for Skid resistance And Further Effects), devices to measure skid resistance were developed at the forerunner of the UK's TRL in the 1930s.

"Now there are lots of different types of equipment in use across Europe and around the world. Unfortunately, they operate on different principles and give different results because of the large number of variables affecting road/tyre friction," says the TRL.

The results of Tyrosafe will encourage public authorities of EU Member States to use existing and new research knowledge, to reduce fatalities, and promote environmental compatibility of road surfaces.

"The main objectives of the project were to raise awareness, to coordinate and prepare for European harmonisation, and to optimise the assessment and management of essential tyre/road interaction parameters, in order to increase safety and support greening of European road transport," says Tyrosafe, which completed its two-year project at the end of June.

The project is a coordination action funded by the European Community's Seventh Framework Programme and it consists of seven European partners (coordinator, the 2682 Austrian Institute of Technology; Bundesanstalt für Straßenwesen (1369 BASt), Germany; 2686 Rijkswaterstaat Dienst Verkeer en Scheepvaart - Ministry of Transport and Navigation, The Netherlands; 2687 Slovenian National Building and Civil Engineering Institute; 1364 Forum of European National Highway Research Laboratories, Belgium; Laboratoire Central des Ponts et Chaussées (1368 LCPC), France, and TRL.

"The most significant project outcomes are the recommendations for future policies concerning road surface properties, the Roadmap and Implementation Plan for Harmonisation of Skid Resistance Measurement Techniques, and the report on influences of road surface properties on skid resistance, rolling resistance, noise emissions, their interdependencies, and the investigation of their interaction with climatic change," says Tyrosafe.

"Environmental questions concerning noise pollution, air quality, and consumption of energy are becoming more and more important. Research has shown that road surface properties can be used to achieve increased safety and reduced environmental impact of road traffic. Drivers need sufficient grip between tyres and the road to accelerate, decelerate or change direction.

"With a sufficiently high level of skid resistance, the safety of roads can be improved and the number of accidents can be reduced."

The winners of the Tyrosafe video competition to produce a short video conveying the importance and raising awareness about the interactions among tyres, roads and safety were Gregor Salobir, Alma Muminovi?, Teja Pišek, Anamarija Repuši?, Karmen Vesenjak who produced TyroSafe-CARO Your Car and Road Science Lab.

Related Content

  • Ambitious growth plans for Alliance Tire Group
    January 6, 2017
    With plans to almost double its annual sales from $555m today $1bn in 2017, Alliance Tire Group (ATG) is keen to push its message of innovation at INTERMAT 2015. “It’s our ambition to be one of the top three global market leaders in the agricultural, forestry and construction sectors,” said ATG’s European president Peter Bauer, recently brought into the group to drive its expansion in Europe.
  • Ambitious growth plans for Alliance Tire Group
    April 22, 2015
    With plans to almost double its annual sales from $555m today $1bn in 2017, Alliance Tire Group (ATG) is keen to push its message of innovation at INTERMAT 2015. “It’s our ambition to be one of the top three global market leaders in the agricultural, forestry and construction sectors,” said ATG’s European president Peter Bauer, recently brought into the group to drive its expansion in Europe.
  • New R&D facilities for Nynas
    July 12, 2012
    Nynas is investing nearly €2.7 million in new research and development facilities at the company's refinery in Nynäshamn. This investment forms part of the company's ongoing expansion in the world market for specialty oils. The new research and development lab is, in principle, a smaller version of Nynas' full-scale hydrogenation facility. Hydrogenation is one of Nynas' central processes, in which various oil distillates are purified from sulphur and aromatic hydrocarbons using hydrogen gas. Hydrogenation r
  • The Path to Climate-Neutral Road Construction
    October 1, 2023
    Machine manufacturers and construction companies around the globe are currently searching for ways to achieve the goal of climate-neutral construction. The challenge here is to successively reduce emissions of CO2 and other harmful gases (summarized to CO2 equivalents: CO2e) around the world to zero over the coming decades. In the road construction sector, this transformation is inextricably linked to the improvement and further development of production and working processes. In the future, machines and construction materials will also be assessed based on the climate-harmful emissions arising from their production and use. However, the focus should not be on individual machines, but on the entire process leading up to the finished product – a road. Ultimately, the decisive factor is the emissions generated per kilometer of newly built or rehabilitated road – the “CO2e per work done”.