Skip to main content

Researching vehicle tyre safety

For the last two years a team of European partners has been examining the interaction between vehicle tyres and road surfaces. According to the UK's TRL, one of the partners in the European project Tyrosafe (Tyre and Road Surface Optimisation for Skid resistance And Further Effects), devices to measure skid resistance were developed at the forerunner of the UK's TRL in the 1930s.
February 15, 2012 Read time: 3 mins
The European Tyrosafe project has been examining the interaction between vehicle tyres and road surfaces
For the last two years a team of European partners has been examining the interaction between vehicle tyres and road surfaces.

According to the UK's 777 TRL, one of the partners in the European project Tyrosafe (Tyre and Road Surface Optimisation for Skid resistance And Further Effects), devices to measure skid resistance were developed at the forerunner of the UK's TRL in the 1930s.

"Now there are lots of different types of equipment in use across Europe and around the world. Unfortunately, they operate on different principles and give different results because of the large number of variables affecting road/tyre friction," says the TRL.

The results of Tyrosafe will encourage public authorities of EU Member States to use existing and new research knowledge, to reduce fatalities, and promote environmental compatibility of road surfaces.

"The main objectives of the project were to raise awareness, to coordinate and prepare for European harmonisation, and to optimise the assessment and management of essential tyre/road interaction parameters, in order to increase safety and support greening of European road transport," says Tyrosafe, which completed its two-year project at the end of June.

The project is a coordination action funded by the European Community's Seventh Framework Programme and it consists of seven European partners (coordinator, the 2682 Austrian Institute of Technology; Bundesanstalt für Straßenwesen (1369 BASt), Germany; 2686 Rijkswaterstaat Dienst Verkeer en Scheepvaart - Ministry of Transport and Navigation, The Netherlands; 2687 Slovenian National Building and Civil Engineering Institute; 1364 Forum of European National Highway Research Laboratories, Belgium; Laboratoire Central des Ponts et Chaussées (1368 LCPC), France, and TRL.

"The most significant project outcomes are the recommendations for future policies concerning road surface properties, the Roadmap and Implementation Plan for Harmonisation of Skid Resistance Measurement Techniques, and the report on influences of road surface properties on skid resistance, rolling resistance, noise emissions, their interdependencies, and the investigation of their interaction with climatic change," says Tyrosafe.

"Environmental questions concerning noise pollution, air quality, and consumption of energy are becoming more and more important. Research has shown that road surface properties can be used to achieve increased safety and reduced environmental impact of road traffic. Drivers need sufficient grip between tyres and the road to accelerate, decelerate or change direction.

"With a sufficiently high level of skid resistance, the safety of roads can be improved and the number of accidents can be reduced."

The winners of the Tyrosafe video competition to produce a short video conveying the importance and raising awareness about the interactions among tyres, roads and safety were Gregor Salobir, Alma Muminovi?, Teja Pišek, Anamarija Repuši?, Karmen Vesenjak who produced TyroSafe-CARO Your Car and Road Science Lab.

Related Content

  • Testing high performance road markings
    February 9, 2012
    High performance markings are among the safety products used to guide traffic safely, but they must be tested and checked. Patrick Smith reports. Road construction zones, zebra crossings, tunnels and areas with frequent fog are particular focal points with regard to road user safety. This is why manufacturers, authorities and contractors are always eager to use innovative road markings and special studs or, where necessary, lane control devices to assist both drivers and pedestrians in all conditions, parti
  • Asphalt and bitumen - testing for performance
    February 29, 2012
    The stresses placed on modern asphalt and bitumen means that specialist equipment is essential to make sure performance specifications are met. As road traffic increases at a rapid pace and road safety becomes a priority issue, asphalt is put under increasingly higher stresses. For example, road surfaces are subject to compression, flexural tensions and tangential stresses: internal friction, depending on the aggregates, and the cohesion, guaranteed by bitumen's composition, are the two main properties whic
  • ITS UK Awards 2024: the winners are...
    November 20, 2024
    Valerann, AtkinsRéalis, Yutraffic Actis, Gridicity, Vivacity and AGD Systems were among the companies which either walked away with an award or whose ITS leaders were individual awards winners.
  • Using smartphones when driving is more dangerous than drink driving
    April 20, 2012
    Using smartphones for social networking while driving is more dangerous than drink driving or being high on cannabis behind the wheel according to research published by the IAM (Institute of Advanced Motorists) in the UK. Despite this, eight per cent of drivers admit to using smartphones for email and social networking while driving. Twenty-four per cent of 17-24 year old drivers, a group already at higher risk of being in a crash, admit to using smartphones for email and social networking while driving.