New advances in engines and drivelines due

An array of innovative new engine and driveline developments are due – Mike Woof writes. With key construction machine events due in the New Year, various firms are already revealing plans for the future for their engines and driveline ranges and developments. Tough regulations on emissions have driven manufacturers to address this issue, while new and more efficient drives also help cut fuel use. Optimising power delivery provides an important component in reducing quantities of fuel burned, with a benefic
January 4, 2013 Read time: 4 mins
The new Caterpillar C9.3 diesel meets the Tier 4 Final/Stage IV emissions requirements

An array of innovative new engine and driveline developments are due – Mike Woof writes

With key construction machine events due in the New Year, various firms are already revealing plans for the future for their engines and driveline ranges and developments. Tough regulations on emissions have driven manufacturers to address this issue, while new and more efficient drives also help cut fuel use.

Optimising power delivery provides an important component in reducing quantities of fuel burned, with a beneficial cut in CO2 emissions also. Driveline firms such as 3713 Allison transmission and 2254 Dana have been making steady advances in this field. The companies have entered into an agreement to licence the rights to the sophisticated NuVinci technology developed by 7065 Fallbrook Technologies and the firms intend to cooperate on engineering and manufacturing for these advanced transmissions.

This innovative continuously variable planetary (CVP) technology is expected to deliver greater overall vehicle efficiency and performance and will be incorporated into off-highway machines, as well as passenger vehicles and commercial vehicles. The Fallbrook NuVinci CVP technology is said to enable designers to reduce the complexity of transmissions, superchargers, and other powertrain systems. The system allows the engine to operate at more efficient speeds and is being licensed to Allison and Dana.

Through its agreement, Allison gains the exclusive rights from Fallbrook to use this CVP technology to develop primary drivetrain transmissions for certain off-highway and large stationary equipment markets. Under a separate agreement, Dana will hold an exclusive license from Fallbrook to engineer and produce transmission components and other advanced powertrain solutions with the NuVinci CVP technology for certain off-highway vehicles in the markets it serves.

Meanwhile Allison Transmission and Dana have signed a letter of intent for an alliance through which Dana would exclusively manufacture transmission components with NuVinci CVP technology for Allison.

The proprietary NuVinci CVP technology is a continuously variable transmission that is scalable and highly adaptable. It controls speed and torque and suits duties in mechanical devices that have a transmission or can benefit from speed or torque variation. This transmission uses a set of rotating balls between the input and output components. Tilting the balls changes their contact diameters and varies the speed ratio. Compared to other current transmission technologies, Fallbrook's analysis indicates that its technology is less complex, costs less to manufacture, and helps achieve optimum performance. Dana expects to have off-highway transmissions on the market featuring this sophisticated technology within five years.

From 178 Caterpillar comes its next generation C9.3 ACERT 9.3litre diesel, which is designed to meet the Tier 4 Final/Stage IV emissions requirements. According to Caterpillar its six cylinder C9.3 ACERT diesel delivers high power density with power ratings from 224-298kW.

The key to its low smoke tailpipe performance is the fully-integrated clean emission module (CEM), which incorporates diesel oxidation catalyst (DOC), diesel particulate filter (DPF), and selective catalytic reduction (SCR) technology. Caterpillar’s SCR technology reduces NOx and is said to be robust and economical. The combination of the high pressure common rail fuel system and new after-treatment technology is said by ACERT to improve fuel consumption by up to 4% over the firm’s existing Tier 4 Interim/Stage IIIB compliant version of the C9.3 diesel. The CEM system is said to simplify OEM after-treatment installation and its design allows mounting in either horizontal or vertical configurations, giving users a wider range of fitting options. Caterpillar will have a full line of Tier 4 Final/Stage IV engine solutions when these are required, with power output from 25.4–895kW and the company has developed specific technologies tailored to each power band.

From 201 Deutz AG comes a restructured business and technology partnership between 3405 Bosch and 3435 Eberspächer for exhaust after-treatment. Deutz and Eberspächer are selling their shares in Bosch Emission Systems GmbH (BESG) to majority shareholder Bosch for an undisclosed sum, subject to approval from the antitrust authorities. However Deutz and Bosch will work more closely to develop sophisticated exhaust after-treatment, diesel injection technology and electronics, with the project intended to integrate drive technology for mobile machinery. However, BESG will continue to supply DEUTZ with exhaust aftertreatment systems.
Engines, Components & Tyres

For more information on companies in this article

Related Content

  • Higher production from all-wheel-drive haulers
    August 2, 2012
    The improvements to articulated dump trucks (ADTs) have been substantial in recent years. Comparing a present day machine with one from 20 or even just 10 years ago shows how far design has come. Major improvements have been made in visibility, operator comfort levels, rough terrain performance, driveline efficiency and productivity, to name but a few key areas. All of the latest generation ADTs available on the world market now come with Tier 3/Stage IIIA compliant diesels that produce far lower noise and
    Read More
  • Dana shows HVT R3 at INTERMAT
    January 6, 2017
    Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
    Read More
  • Dana shows HVT R3 at INTERMAT
    April 19, 2012
    Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
    Read More
  • Latest C7.1 engine meets Tier 4 Final/Stage IV using SCR
    January 6, 2017
    Caterpillar’s industrial engines division is using the C7.1 as a common engine platform as a replacement for the C6.6 as it meets Tier 4 Final/Stage IV emissions regulations. It means the 7.1litre six-cylinder C7.1 offers power ratings from 116kW to 225kW in either single turbo or series turbo configurations, and adds an SCR catalyst and diesel exhaust fluid dosing system as part of the existing exhaust after-treatment process.
    Read More

Highlighted Content