New advances in engines and drivelines due

An array of innovative new engine and driveline developments are due – Mike Woof writes. With key construction machine events due in the New Year, various firms are already revealing plans for the future for their engines and driveline ranges and developments. Tough regulations on emissions have driven manufacturers to address this issue, while new and more efficient drives also help cut fuel use. Optimising power delivery provides an important component in reducing quantities of fuel burned, with a benefic
January 4, 2013 Read time: 4 mins
The new Caterpillar C9.3 diesel meets the Tier 4 Final/Stage IV emissions requirements

An array of innovative new engine and driveline developments are due – Mike Woof writes

With key construction machine events due in the New Year, various firms are already revealing plans for the future for their engines and driveline ranges and developments. Tough regulations on emissions have driven manufacturers to address this issue, while new and more efficient drives also help cut fuel use.

Optimising power delivery provides an important component in reducing quantities of fuel burned, with a beneficial cut in CO2 emissions also. Driveline firms such as 3713 Allison transmission and 2254 Dana have been making steady advances in this field. The companies have entered into an agreement to licence the rights to the sophisticated NuVinci technology developed by 7065 Fallbrook Technologies and the firms intend to cooperate on engineering and manufacturing for these advanced transmissions.

This innovative continuously variable planetary (CVP) technology is expected to deliver greater overall vehicle efficiency and performance and will be incorporated into off-highway machines, as well as passenger vehicles and commercial vehicles. The Fallbrook NuVinci CVP technology is said to enable designers to reduce the complexity of transmissions, superchargers, and other powertrain systems. The system allows the engine to operate at more efficient speeds and is being licensed to Allison and Dana.

Through its agreement, Allison gains the exclusive rights from Fallbrook to use this CVP technology to develop primary drivetrain transmissions for certain off-highway and large stationary equipment markets. Under a separate agreement, Dana will hold an exclusive license from Fallbrook to engineer and produce transmission components and other advanced powertrain solutions with the NuVinci CVP technology for certain off-highway vehicles in the markets it serves.

Meanwhile Allison Transmission and Dana have signed a letter of intent for an alliance through which Dana would exclusively manufacture transmission components with NuVinci CVP technology for Allison.

The proprietary NuVinci CVP technology is a continuously variable transmission that is scalable and highly adaptable. It controls speed and torque and suits duties in mechanical devices that have a transmission or can benefit from speed or torque variation. This transmission uses a set of rotating balls between the input and output components. Tilting the balls changes their contact diameters and varies the speed ratio. Compared to other current transmission technologies, Fallbrook's analysis indicates that its technology is less complex, costs less to manufacture, and helps achieve optimum performance. Dana expects to have off-highway transmissions on the market featuring this sophisticated technology within five years.

From 178 Caterpillar comes its next generation C9.3 ACERT 9.3litre diesel, which is designed to meet the Tier 4 Final/Stage IV emissions requirements. According to Caterpillar its six cylinder C9.3 ACERT diesel delivers high power density with power ratings from 224-298kW.

The key to its low smoke tailpipe performance is the fully-integrated clean emission module (CEM), which incorporates diesel oxidation catalyst (DOC), diesel particulate filter (DPF), and selective catalytic reduction (SCR) technology. Caterpillar’s SCR technology reduces NOx and is said to be robust and economical. The combination of the high pressure common rail fuel system and new after-treatment technology is said by ACERT to improve fuel consumption by up to 4% over the firm’s existing Tier 4 Interim/Stage IIIB compliant version of the C9.3 diesel. The CEM system is said to simplify OEM after-treatment installation and its design allows mounting in either horizontal or vertical configurations, giving users a wider range of fitting options. Caterpillar will have a full line of Tier 4 Final/Stage IV engine solutions when these are required, with power output from 25.4–895kW and the company has developed specific technologies tailored to each power band.

From 201 Deutz AG comes a restructured business and technology partnership between 3405 Bosch and 3435 Eberspächer for exhaust after-treatment. Deutz and Eberspächer are selling their shares in Bosch Emission Systems GmbH (BESG) to majority shareholder Bosch for an undisclosed sum, subject to approval from the antitrust authorities. However Deutz and Bosch will work more closely to develop sophisticated exhaust after-treatment, diesel injection technology and electronics, with the project intended to integrate drive technology for mobile machinery. However, BESG will continue to supply DEUTZ with exhaust aftertreatment systems.
Engines, Components & Tyres

For more information on companies in this article

Related Content

  • Deutz develops low emission diesel range
    February 6, 2013
    The new Tier 4 Final/Stage IV emission certified engine range from Deutz is being introduced. This complete line-up of diesels meets the coming noise and exhaust emission requirements in Europe and the US and offers capacities from 2.9-16litres. The low emissions performance is achieved using the Deutz DVERT technology, a package of technical solutions that is used in modular form with varying options used to ensure each engine capacity meets the requirements. Compact design and high torque output are claim
    Read More
  • Emphasis on the new at record-breaking World of Asphalt 2013 & AGG1
    February 21, 2013
    The 2013 World of Asphalt and AGG1 expositions taking place March 19-21 in San Antonio, Texas are on course to be sold out by opening day, setting new records for exhibitor numbers and attendees. Guy Woodford discovers that major construction industry manufacturers will be highlighting new as well as established machine models in their exhibits at the co-located events Covering more than 10,870m² of exhibit space, attendees at the 2013 World of Asphalt and AGG1 shows can expect to find a huge line-up of new
    Read More
  • Wheeled loaders tackle costs, reduce emissions
    February 7, 2012
    Volvo CE says that lowering fuel consumption will tackle fleet costs and deliver environmental benefits for its customers, Mike Woof reports. Volvo Construction Equipment (Volvo CE) is targeting fuel economy and performance with its latest generation of machines. The new L180F and L220F wheeled loader models are being fitted with the sophisticated OptiShift package, which will boost operation and driveline efficiencies and cut fuel consumption by 15%, and more in some instances.
    Read More
  • Cummins moves closer to Stage IV emissions at INTERMAT
    January 6, 2017
    Cummins is using INTERMAT to display a full line-up of engines in the 56-506kW sector with next generation exhaust after treatment systems that meet EU Stage IV and EPA Tier 4 Final emissions regulations.
    Read More

Highlighted Content