Skip to main content

Recycled pavement use rises again in the US, according to NAPA

The use of reclaimed asphalt pavement in the United States increased during 2013 after two years of no rise, according the latest report from the US National Asphalt Pavement Association (NAPA). The report found that more than 73 million tons of reclaimed asphalt pavement and 1.7 million tons of reclaimed asphalt roofing shingles were used in new asphalt pavement mixes in the United States during in 2013. Using recycled asphalt material saved about $2 billion in 2013 over the use of virgin materials,
January 16, 2015 Read time: 3 mins
The use of reclaimed asphalt pavement in the United States increased during 2013 after two years of no rise, according the latest report from the US 3464 National Asphalt Pavement Association (NAPA).

The report found that more than 73 million tons of reclaimed asphalt pavement and 1.7 million tons of reclaimed asphalt roofing shingles were used in new asphalt pavement mixes in the United States during in 2013.

Using recycled asphalt material saved about $2 billion in 2013 over the use of virgin materials, the report noted.

The use of recycled material is one of several topics to be discussed at a major Conference on road asset maintenance in Paris, the Pavement Preservation and Recycling Summit from, February 22-25.

The NAPA/FHWA report said that the number of tons of asphalt pavement mixtures produced using recycled and reclaimed materials was predominately flat from 2012 to 2013. This is despite a 2.5% drop in total tons of asphalt produced during 2013 compared to 2012.

However, the percentage of tons produced using these materials was slightly greater in 2013 than 2012.

The survey was conducted in mid-2014 by NAPA under contract to the 2410 Federal Highway Administration (FHWA). The report was compiled using results from 249 companies with 1,281 plants in all 50 US states, the District of Columbia and Puerto Rico. Also used was information from asphalt pavement associations in 38 states.

A full copy of the NAPA/FHWA report can be downloaded from %$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal here Download the form false http://www.asphaltpavement.org/recycling false false%>.

The issue of saving money but at the same time maintaining road assets is one of the most important discussions globally, especially during these austere times where governments at all levels are seeing budget drastically reduced. But road must be maintained or the wider economy will suffer.

“Insufficient maintenance has created a backlog and is affecting service levels,” said Jean-Francois Corte, secretary general of the World Road Association (3141 PIARC), based in Paris.

“What’s needed right now is at least a medium-term vision to embrace the right type of maintenance, a strong strategy. Because there has been insufficient maintenance, road networks are degrading faster. Many highways authorities don’t have this medium- or long-term approach to highway maintenance because they are bound by their government’s annual budgets.”

Attendees to the Pavement Preservation and Recycling Summit in Paris next month will learn how, during these austere times, to put the business case forward to ensure more investment is there when and where it is needed.

Speakers will include Bud Wright, executive director of the 3510 American Association of State Highway and Transportation Officials (AASHTO) and William Finerty, a vice-president of 178 Caterpillar.

To find out more about the three-day PPRS 2015 event and register, please visit the official 7924 PPRS 2015 website.

A recent publication by PIARC, called The Importance of Road Maintenance, is available as a free download from %$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal here Visit PIARC website false http://www.piarc.org/en/publications/technical-reports/ false false%>.

Related Content

  • ContiTech’s new technology for fabric conveyor belts reduces weight and spares resources
    April 18, 2013
    The ContiTech Conveyor Belt Group claims it has taken a major step towards sustainable technology with the launch of the Conti lightweight, which can reduce the weight of fabric conveyor belts by up to 30%. “The lower weight significantly reduces the amount of drive energy needed,” explained Frank Kantorek, from the company’s business development section. “This means Conti lightweight technology makes a major contribution to the conservation of resources and protection of the environment,” he added.
  • Terex launches Superlift 3800 crawler crane
    April 18, 2013
    Terex Cranes has replaced its CC2800-1 crawler crane with the Superlift 3800 lattice boom, offering improved speed and efficiency for customers. The 3800 can handle loads of up to 650tonnes at a radius of 5-12m and has a maximum load moment of 8,426t/m. Terex says that customers have been involved in the new crane’s development from the start, resulting in improvements in many areas. The crane uses the Terex Crane Fall Protection System, with additional railings installed around the superstructure. It is th
  • Netherlands: Velsertunnel to be closed for nine months
    April 19, 2016
    The 60-year-old road and rail Velsertunnel in the Netherlands will be closed from now until the end of the year for major renovations. Improvements to the Velsertunnel beneath the North Sea Canal are scheduled for the road sections only, according to the Rijkswaterstaat, the Dutch government’s Ministry of Infrastructure and the Environment, and the consortium doing the work. Rijkswaterstaat awarded a design/build/maintain contract in 2014 to Hyacint, a consortium of Besix, Dura Vermeer, and Spie, supp
  • GreyStone highlights Unibody fine material washing screw
    January 6, 2017
    GreyStone, which offers a comprehensive line of portable and semi-portable aggregate equipment, is highlighting its new products including the recently released Unibody fine material washing screw. The company says that the Unibody can be set up quickly, and consistently delivers thoroughly-cleaned aggregate, saving time and money. A one-piece body design, fabricated using ASTM A36-certified structural steel, allows the 25ft x 36inch (1m) Unibody to be moved without the need for extra highway permits.