Skip to main content

Breaking at the face

Italian customer Marocca Group is using an Indeco HP18000 hydraulic breaker (the heaviest hydraulic breaker on the market at present) for primary demolition at a limestone quarry in Anagni, close to capital Rome. The 40ha quarry produces high grade limestone in 21 different sizes to meet an array of construction needs, and the bespoke fully automated crushing and screening plant is able to process over 500m³/hour of rock. By using the HP18000 in a primary winning application, Marocca Group has also been abl
July 16, 2012 Read time: 2 mins
RSSItalian customer Marocca Group is using an 237 Indeco HP18000 hydraulic breaker (the heaviest hydraulic breaker on the market at present) for primary demolition at a limestone quarry in Anagni, close to capital Rome.

The 40ha quarry produces high grade limestone in 21 different sizes to meet an array of construction needs, and the bespoke fully automated crushing and screening plant is able to process over 500m³/hour of rock.

By using the HP18000 in a primary winning application, Marocca Group has also been able to significantly reduce operating costs by minimising its use of explosives, which are costly and subject to strict regulations. Many quarry operators are keen to cut their reliance on blasting: this has been particularly apparent in Italy, where regulations have long been much tougher than in other European countries.
Comparative research carried out on rock produced from quarries using breakers for primary winning against blasted stone shows other benefits from using hydraulic hammers. Where breakers are used, the stone produced features less micro-cracking and is said to offer high performance in civil engineering applications as it is less likely to feature crack propagation.

The Marocca Group has been using Indeco breakers in its quarries for five years and in addition to the huge HP18000 it also has an HP2500, an HP7500 and an HP12000. Maintenance for its Indeco breakers is provided by Fratelli Alpassi, while for scheduled maintenance and periodic overhaul, the Bari plant also provides servicing.

The HP18000 is being used on a 120tonne 233 Hitachi excavator fitted with a Lenhoff quick coupler. The breaker is mounted on the quick coupler as Marocca also uses a ripper and a bucket on the excavator when required.

According to Marocca, the HP18000 is able to carry out the work of two mid-sized breakers, and it can break up the hardest blocks of materials, enabling it to clean each seam faster, a critical procedure for safety and for restoring the site.
RSS

For more information on companies in this article

Related Content

  • Extra bucket versatility with thumb tool
    September 6, 2019
    Solesbee’s, part of Kinshofer, is offering its series of manual and hydraulic excavator thumbs for any size and model excavator. The thumbs allow operators to move from one application to another, such as moving dirt or material, without changing attachments. This versatility is said to increase efficiency for a variety of applications, including land clearing, site preparation, demolition and recycling. Solesbee’s says that it engineers its thumbs with efficiency and safety in mind. The company work
  • Asphalt plant upgrade in Germany
    May 8, 2019
    An asphalt plant upgrade has helped boost long-term efficiency for a producer in southern Germany. The firm, Fiegl, based in Bavaria, invested in a new asphalt mixing plant four years ago. More recently, the firm also replaced the plant’s baghouse. The retrofit has since helped lower the plant’s emissions, noise output and fuel consumption. The time frame for the retrofit was tight because it was important to avoid lengthy downtime and production outages in mid-season. This meant that the changeover had to
  • Volvo CE president unveils emissions technology and product development programme
    January 6, 2017
    Volvo Construction Equipment president Pat Olney has unveiled the low-emissions technology used in the company’s forthcoming Stage IV/Tier 4 Final-compliant machines. He also detailed the progress of investments in Europe and other international markets and announced the extensive development pipeline that will see a radically updated product range launched over the next two years.
  • Volvo CE president unveils emissions technology and product development programme
    April 17, 2013
    Volvo Construction Equipment president Pat Olney has unveiled the low-emissions technology used in the company’s forthcoming Stage IV/Tier 4 Final-compliant machines. He also detailed the progress of investments in Europe and other international markets and announced the extensive development pipeline that will see a radically updated product range launched over the next two years.