Skip to main content

Breaking at the face

Italian customer Marocca Group is using an Indeco HP18000 hydraulic breaker (the heaviest hydraulic breaker on the market at present) for primary demolition at a limestone quarry in Anagni, close to capital Rome. The 40ha quarry produces high grade limestone in 21 different sizes to meet an array of construction needs, and the bespoke fully automated crushing and screening plant is able to process over 500m³/hour of rock. By using the HP18000 in a primary winning application, Marocca Group has also been abl
July 16, 2012 Read time: 2 mins
RSSItalian customer Marocca Group is using an 237 Indeco HP18000 hydraulic breaker (the heaviest hydraulic breaker on the market at present) for primary demolition at a limestone quarry in Anagni, close to capital Rome.

The 40ha quarry produces high grade limestone in 21 different sizes to meet an array of construction needs, and the bespoke fully automated crushing and screening plant is able to process over 500m³/hour of rock.

By using the HP18000 in a primary winning application, Marocca Group has also been able to significantly reduce operating costs by minimising its use of explosives, which are costly and subject to strict regulations. Many quarry operators are keen to cut their reliance on blasting: this has been particularly apparent in Italy, where regulations have long been much tougher than in other European countries.
Comparative research carried out on rock produced from quarries using breakers for primary winning against blasted stone shows other benefits from using hydraulic hammers. Where breakers are used, the stone produced features less micro-cracking and is said to offer high performance in civil engineering applications as it is less likely to feature crack propagation.

The Marocca Group has been using Indeco breakers in its quarries for five years and in addition to the huge HP18000 it also has an HP2500, an HP7500 and an HP12000. Maintenance for its Indeco breakers is provided by Fratelli Alpassi, while for scheduled maintenance and periodic overhaul, the Bari plant also provides servicing.

The HP18000 is being used on a 120tonne 233 Hitachi excavator fitted with a Lenhoff quick coupler. The breaker is mounted on the quick coupler as Marocca also uses a ripper and a bucket on the excavator when required.

According to Marocca, the HP18000 is able to carry out the work of two mid-sized breakers, and it can break up the hardest blocks of materials, enabling it to clean each seam faster, a critical procedure for safety and for restoring the site.
RSS

For more information on companies in this article

Related Content

  • Atlas Copco launches its new Hurricane B4-41/1000 CE booster compressor
    January 6, 2017
    Atlas Copco has launched its new Hurricane B4-41/1000 CE booster compressor, which it says offers advanced operational, safety and maintenance features that result in low downtime. “Drilling for oil, gas, water and geothermal energy are critical operations where there is little margin, or tolerance, for booster failure and downtime.
  • Atlas Copco launches its new Hurricane B4-41/1000 CE booster compressor
    April 20, 2012
    Atlas Copco has launched its new Hurricane B4-41/1000 CE booster compressor, which it says offers advanced operational, safety and maintenance features that result in low downtime. “Drilling for oil, gas, water and geothermal energy are critical operations where there is little margin, or tolerance, for booster failure and downtime.
  • Innovations are pushing boundaries in the concrete road paving sector
    February 18, 2013
    The concrete road paving market continues to develop - Mike Woof reports Concrete road paving technology continues to evolve, with new equipment and techniques coming to market. Although concrete road construction has been used for many years, problems with early generation technologies affected this market segment. The first concrete roads were constructed in sections, which led to problems at joints but these were addressed many years ago with the advent of slipform paving. Concrete roads constructed in t
  • Rebuilding a Chinese highway using RAP
    February 22, 2019
    A Chinese contractor has opted to use RAP in delivering quality roadways at lower cost. The firm utilised an ABA UniBatch asphalt plant from Ammann to achieve this. The Chinese authorities are at present keen to increase the use of RAP in road building, in a bid to reduce the environmental impact of construction projects. However for this to be carried out, the high RAP-content mix must meet high quality standards. Shandong Binzhou Road Construction Corp (SBRCC) has carried out a number of high-profil