Power Pavers catches the train

An SF-3000 machine from Power Pavers has been carrying out a paving job on Highway 218 to the north of Waterloo in the US state of Iowa. The SF-3000 machine forms part of a paving train on the project, which involved replacing and widening a section of the roadway and building new on/off ramps. The two-lane roadway has been paved to a thickness of 356mm and was paved over dowel baskets, while a key-way inserter with tie-bars was used. The job has also required the use of a Power Pavers PS-2700 placer/spread
November 29, 2012 Read time: 1 min
Paving equipment from Power Pavers has been used on a concrete road project in Iowa
An SF-3000 machine from 3975 Power Pavers has been carrying out a paving job on Highway 218 to the north of Waterloo in the US state of Iowa. The SF-3000 machine forms part of a paving train on the project, which involved replacing and widening a section of the roadway and building new on/off ramps. The two-lane roadway has been paved to a thickness of 356mm and was paved over dowel baskets, while a key-way inserter with tie-bars was used. The job has also required the use of a Power Pavers PS-2700 placer/spreader and a TC-2700 texture cure machine. Local firm Cunningham Construction, based in Cedar Falls, has been carrying out the concrete contracting portion of the work on the new road surface.
Materials

For more information on companies in this article

Related Content

  • Kenya rehabilitates, widens, tolls Northern Corridor
    November 8, 2017
    A massive highway project in Kenya will boost transport for the country as well as its neighbours - Shem Oirere reports. Kenya has commenced the process of rehabilitating, expanding and tolling of 657km of East Africa’s Northern Corridor that is anchored on the Indian Ocean port of Mombasa and which links the gateway with landlocked countries of Uganda, Rwanda, Burundi and parts of eastern Democratic Republic of Congo (DRC).
    Read More
  • Race track rebuild in Italy
    May 15, 2019
    A motor racing circuit in Italy has benefited from a new asphalt surface, with the paving work carried out by machines from Sumitomo.
    Read More
  • High production paving
    February 28, 2012
    In Germany a high production paving operation has been achieved using the largest machine available on the market. This project is all the more notable as the operation has been carried out in a continuous process, without joints. The Vögele SUPER 3000-2 paver was able to advance continuously at a rate of almost 4m/min. The machine was preceded by a bustle of activity, for no fewer than 24 feed lorries were needed to ensure an uninterrupted supply of mix to the paver, which placed an even asphalt surfacing
    Read More
  • Maputo Airport runway rebuild
    March 26, 2019
    Rebuilding work has been carried out on the runway and taxiways at Maputo International Airport in Mozambique. The work was carried out for Aeroportos de Moçambique, with the engineering handled by NACO and US$64 million of funding being suplied by Agence Française de Dévelopement.
    Read More

Highlighted Content