Japanese pumping innovation from Tsurumi

Japanese pump manufacturer, Tsurumi, is introducing new drainage pumps to the European market. The new models include a new level sensor KTZE pump as well as the GPN415 and GPN 622 sand pumps. The new drainage KTZE pump is based on Tsurumi’s proven KTZ range, which suits heavy-duty applications. The new model is available in seven variants with power ratings from 1.5-3.7kW at 400V. The pump can deliver 430-1440litres/min, depending on the model and provides a maximum lifting head of 36.5m. The discharge
December 8, 2014 Read time: 3 mins
The new KTZE pumps from Tsurumi are amongst several new model launches from the firm
RSSJapanese pump manufacturer, 2357 Tsurumi Pump, is introducing new drainage pumps to the European market. The new models include a new level sensor KTZE pump as well as the GPN415 and GPN 622 sand pumps. The new drainage KTZE pump is based on Tsurumi’s proven KTZ range, which suits heavy-duty applications.

The new model is available in seven variants with power ratings from 1.5-3.7kW at 400V. The pump can deliver 430-1440litres/min, depending on the model and provides a maximum lifting head of 36.5m. The discharge of the pump can be adjusted either horizontally or vertically, which helps to keep the pump standing in the direction of discharge, although the pump can run in any position. A novel feature is that stable electrodes determine the level of control in the pump, increasing reliability and providing a benefit on-site where the ground is not flat. The automatic pump can be left unattended saving substantial operating costs. The pump starts when the sensor identifies the correct water level and then stops. The user can adjust the level required.

This versatile pump can be used for dirty water solutions such as rainwater, sandy water and groundwater, including water contaminated with granular solids up to 8.5mm in diameter. The housing is made of cast iron and is resilient as the semi-open vortex impeller is made of chromium cast iron and the double mechanical seal, in the oil chamber, is made of silicon carbide.

Tsurumi is also expanding its GPN pumps, and is launching the new GPN415 with its 15kW motor and GPN 622 with a 22kW motor, which are designed specifically for sand contaminated pumping applications. Also new are the KTD22.0 and KTD33.0 models. The KTD pump is an agitator version of Tsurumi’s most popular cast iron pump from its KTZ series. Launched recently were the LH4110W pump from the LH-W range and a GSZ-75-4L pump from the GSZ range. The LH4110W high head submersible pump features the largest pumping head in the 779 Tsurumi Europe range and can pump water up to a maximum head of 218m. It has a maximum capacity of 2m3/min and a motor output of 110kW. The GSZ-75-4L submersible dewatering pump features the biggest pumping capacity in Tsurumi Europe’s range with the maximum volume of 17.6m3/min. It pumps over a delivery head of 38m and has a four-pole motor for increased life of wear parts, featuring a 75 kW motor output.
Materials

For more information on companies in this article

Related Content

  • Advances in mobile crushing delivers cost savings
    February 29, 2012
    New and improved mobile crushing and screening equipment is focused on delivering cost/tonne reductions in aggregate production - Geoff Ashcroft reports. The level of technology being applied to mobile crushing and screening systems continues to advance, which is indicative of manufacturer confidence in this sector as one that continues to offer an economic benefit. An example of how electronic technology can lead to greater productivity can be found with KPI-JCI - the firm has introduced a high resolution
    Read More
  • New milling technology from leading players
    February 9, 2018
    Two major manufacturers, Caterpillar and Wirtgen, are introducing new milling machines. Both firms say that these new, high-production units will offer increased output compared with earlier generation equipment. From Caterpillar come the new PM820, PM822 and PM825 machines, which are half-lane milling machines able to handle full-depth removal of asphalt and concrete pavements in a single pass. The firm claims that these units are highly productive and highly manoeuvrable. In operation the machines weig
    Read More
  • Innovations in crushing and screening technology boosting efficiency
    July 15, 2015
    The crushing and screening sector has seen a flurry of new model launches in recent months, with a series of new equipment introductions - Mike Woof writes. Crushing and screening systems play a vital role in the overall cost effectiveness of a quarrying operation. Ensuring that a quarry runs efficiently relies heavily on the appropriateness of the entire crushing and screening set-up for the material input, the output grades and the compatibility of each separate unit. Mobility has been a key issue in rece
    Read More
  • Concrete mixing technology offers advanced recipes
    February 13, 2012
    Modern concrete production plants are using technology to offer more sophisticated mix recipes as Patrick Smith reports. The growing trend towards ever more sophisticated concrete recipes calls for fully developed mixing technology. Companies are responding to the challenges with equipment that offers new levels of sophistication including computer controls and units that can deliver a huge variety of mix recipes.
    Read More

Highlighted Content