Skip to main content

Innovative additive for use in recycled asphalt applications

Biorefiner Arizona Chemical has spent three years developing a new asphalt additive which it says will revolutionise the use of RAP in road pavements. Sylvaroad RP1000 will allow much higher proportions of RAP to be used and produce a better-performing pavement, according to the manufacturer. “What it essentially does is mobilise the chemical matrix of these aged binders,”
August 13, 2014 Read time: 3 mins
This recent road trial contains 75% Reclaimed Asphalt Pavement (RAP), enabled by Arizona Chemical’s SYLVAROAD RP 1000 Performance Additive

Biorefiner 7856 Arizona Chemical has spent three years developing a new asphalt additive which it says will revolutionise the use of RAP in road pavements. Sylvaroad RP1000 will allow much higher proportions of RAP to be used and produce a better-performing pavement, according to the manufacturer.

“What it essentially does is mobilise the chemical matrix of these aged binders,” said Arizona Chemical’s business unit director for roads and construction Raquel Silverberg.  “It restores the properties of the aged binder in RAP so that it behaves like new.”

Where typically contractors are using 20 to 25% RAP, Sylvaroad RP1000 allows 40%, 50% or higher to be used, according to Silverberg. “This offers a step change in performance in terms of the recycled content you can use, while producing a high-performing road,” she said.

Arizona Chemical launched the product in October 2013. To date it has been used in the US and several European countries on municipal roads, parking lots, industrial roads and in parking applications. Silverberg says that it will soon be tested on public highways in the US.

Arizona Chemical decided to develop Sylvaroad RP1000, its first product developed specifically for paving applications, having carried out an extensive study into market needs. Those it identified were to consume less virgin material, to reduce cracking and to increase the flexibility of pavement mixes.

 “We are chemists by nature, not pavement designers but we asked questions, and put our finest scientists on the job,” said Silverberg. “We found some of the world’s experts on bitumen science so we could understand what actually happens to an aged binder that’s found in RAP. Until you can see and measure the problem, you cannot solve the problem.”

Produced from 90% refined biorenewable materials, Sylvaroad RP1000 is a derivative of tall oil which comes from pine trees. Less than 1% dosage is required to restore an aged binder’s properties according to Arizona Chemical, it is fully miscible, thermally stable and has a higher flash point than bitumen. 

Though some biomaterials can be inconsistent, this product has been designed specifically for its application which means its performance will not vary, says Silverberg.

Sylvaroad RP1000’s sustainability credentials are an added bonus to most contractors or asphalt producers, said Silververg. “The greenness of a product is quite often secondary to performance. Superior performance is why someone would buy your product. When you combine that with the biorenewable element, then you have a pretty compelling value proposition."

For more information on companies in this article

Related Content

  • Better road surfaces to last longer
    August 23, 2013
    Preservation can make roads perform better and last longer - and save money in the long run. Kristina Smith reports BAM Wegen has laid the first ever half-warm porous asphalt section on a major highway in the Netherlands. The asphalt for the 500m-long test section on the A18 near Varsseveld was produced at 105°C rather than 160°C, representing a saving on energy and CO2 emissions of around 30%.
  • Asphalt-rubber binder ideal for repairing worn roadways
    February 28, 2012
    Asphalt rubber is a medium that solves the problem of waste tyres and at the same time produces a material that is suitable for highway use.
  • Asphalt plant innovations from key firms
    June 12, 2017
    Asphalt plant builders continue to develop new technologies to meet different demands from clients. Marini says that in addition to developing new and more sophisticated asphalt plants, the firm is also meeting demands from customers looking to upgrade existing asphalt plants with the addition of new systems. These can be used to boost output and material quality, while also delivering new grades of mixes. At the same time, plant upgrades can reduce the environmental profile of a plant, while improving its
  • Innovative low temperature asphalt and aggregate options and advances
    May 16, 2014
    Studies show the asphalt sector has options for materials use that can lower costs and emissions, as well as increasing the use of recycling One study in the UK led by the Carbon Trust and Lafarge Tarmac has found that low temperature asphalt (LTA) could be used as an alternative to conventional asphalt on roads. Conventional asphalt is made when aggregates and bitumen are bound together at temperatures of between 180ºC-190ºC. However, the trial found that the alternative is able to bond road materia