High performance, special asphalt mixes

There has been a steady increase in mechanical loads applied to road surfaces in the global highway sector. This stems from a combination of increasing traffic volumes, plus heavier trucks. To prevent roads from cracking up under the strain, it has required the development of innovative new asphalt mixes able to cope with the increased mechanical loads. As a result, the research sector and the asphalt producers have been working together to develop special asphalt mixes, which often require special material
October 3, 2018 Read time: 2 mins
Efficient production of special mixes depends on an array of factors
There has been a steady increase in mechanical loads applied to road surfaces in the global highway sector. This stems from a combination of increasing traffic volumes, plus heavier trucks. To prevent roads from cracking up under the strain, it has required the development of innovative new asphalt mixes able to cope with the increased mechanical loads. As a result, the research sector and the asphalt producers have been working together to develop special asphalt mixes, which often require special materials. However, this has also required asphalt plants to be able to produce a much wider range of mixes, from conventional dense mixes to discontinuous mixes with modified asphalt, while providing the same levels of quality and productivity.


As a result, the 364 Wirtgen Group company 6241 Ciber utilised its extensive experience in developing technologies for asphalt plants to develop the dry mix system using a continuous flow mixer. According to the firm, this allows homogenisation of the aggregates before injection of the asphalt binder. The coarse aggregates are routed from the dryer, with fines reused from the bag filter, the external filler and fibres. This is important to ensure the constant thickness of the bitumen film on the surface of the aggregate, ensuring the quality of the mix. The technology is crucial for the production of SMA-type mixes that require cellulose fibres. These fibres have to be thoroughly homogenised in the dry aggregates so as to avoid the risk of any segregation in the mix.

Ciber says that another technology introduced with its latest iNOVA Series of asphalt plants is for automatic control of mixing time between aggregates and asphalt binder. The adhesion capacity between these materials depends mainly on the characteristics of the aggregates. This itself relates to the quantity and type of clay minerals present. But there is a wide variation depending on the origin and processes of formation of the aggregates. As a result, adjusting the mixing time according to the need is crucial for the production of homogeneous mixtures. And the mixing time can be regardless of the characteristics of the materials and design.

Materials

For more information on companies in this article

Related Content

  • A rejuvenator derived from pine trees and natural asphalt
    November 20, 2015
    This month we look at two additives from natural sources: a rejuvenator derived from pine trees and naturally occurring asphalt - Kristina Smith writes One of the problems experienced with pavements containing RAP is that, although they exhibit good rutting resistance, they often fail early due to fatigue cracking. Biorefiner Arizona Chemical has just unveiled independent test results for its SYLVAROAD RP1000 Performance Additive that it says demonstrate that the rejuvenator can help create mixes that ar
    Read More
  • Bitumen provides more durable road surface
    February 7, 2012
    When the main commuter route into Cardiff, the Welsh capital, began to suffer from acute deformation, the Vale of Glamorgan Council required a durable and faster alternative to hot rolled asphalt to ensure minimum disruption for local road users.
    Read More
  • Novel concrete paving method used in Germany
    January 25, 2017
    A novel dual-layer concrete paving technique has been used on jobsites in Germany on the country’s high-speed Autobahn network This technique allows the construction of a strong and durable roadway structure able to cope with heavy traffic loads and offer a long working life. In four German states, Wirtgen SP-1500 slipformers have been employed by four different contractors to carry out dual-layer paving. The method allows a noise-reducing, non-skid exposed aggregate surface to be placed over a bottom
    Read More
  • Technology to ensure continuity and quality for asphalt production
    June 4, 2019
    A variety of complex factors are involved in the production of hot asphalt mixes, with the process vulnerable to sudden stoppages of the equipment. The problems caused by a need for unplanned maintenance are high, as the cost of a plant stoppage is high. In order to minimise disruptions to production, new technologies can be used for wear components. Electronic monitoring of asphalt plant motors during production can boost efficiency, replacing corrective maintenance with preventive and predictive maintenan
    Read More

Highlighted Content