High performance, special asphalt mixes

There has been a steady increase in mechanical loads applied to road surfaces in the global highway sector. This stems from a combination of increasing traffic volumes, plus heavier trucks. To prevent roads from cracking up under the strain, it has required the development of innovative new asphalt mixes able to cope with the increased mechanical loads. As a result, the research sector and the asphalt producers have been working together to develop special asphalt mixes, which often require special material
October 3, 2018 Read time: 2 mins
Efficient production of special mixes depends on an array of factors
There has been a steady increase in mechanical loads applied to road surfaces in the global highway sector. This stems from a combination of increasing traffic volumes, plus heavier trucks. To prevent roads from cracking up under the strain, it has required the development of innovative new asphalt mixes able to cope with the increased mechanical loads. As a result, the research sector and the asphalt producers have been working together to develop special asphalt mixes, which often require special materials. However, this has also required asphalt plants to be able to produce a much wider range of mixes, from conventional dense mixes to discontinuous mixes with modified asphalt, while providing the same levels of quality and productivity.


As a result, the 364 Wirtgen Group company 6241 Ciber utilised its extensive experience in developing technologies for asphalt plants to develop the dry mix system using a continuous flow mixer. According to the firm, this allows homogenisation of the aggregates before injection of the asphalt binder. The coarse aggregates are routed from the dryer, with fines reused from the bag filter, the external filler and fibres. This is important to ensure the constant thickness of the bitumen film on the surface of the aggregate, ensuring the quality of the mix. The technology is crucial for the production of SMA-type mixes that require cellulose fibres. These fibres have to be thoroughly homogenised in the dry aggregates so as to avoid the risk of any segregation in the mix.

Ciber says that another technology introduced with its latest iNOVA Series of asphalt plants is for automatic control of mixing time between aggregates and asphalt binder. The adhesion capacity between these materials depends mainly on the characteristics of the aggregates. This itself relates to the quantity and type of clay minerals present. But there is a wide variation depending on the origin and processes of formation of the aggregates. As a result, adjusting the mixing time according to the need is crucial for the production of homogeneous mixtures. And the mixing time can be regardless of the characteristics of the materials and design.

Materials

For more information on companies in this article

Related Content

  • Recycled asphalt innovations prove cost benefit
    November 5, 2012
    New technologies allow efficient use of recycled asphalt - Mike Woof writes The Eurobitume/Euroasphalt 2012 event in Istanbul earlier this year proved an important event with regard to asphalt recycling innovations. Key developments in this technology were announced, particularly in the field of asphalt production. One of the notable papers came from E-MAK, part of the Turkish Simge Group, which focused on its RATEK system. This technology is designed to use recycled asphalt and can produce greater throughp
    Read More
  • Innovative asphalt production solutions from Marini
    May 24, 2019
    Marini has developed an innovative solution for asphalt production, able to use up to 100% RAP in the mix - Mike Woof writes Italian firm Marini has long been one of the leaders in the field of asphalt plant design and development, competing against other key companies in the segment based in the US, Switzerland and Germany. Marini is expanding its range, with what it claims will be a revolutionary system for using recycled asphalt pavement (RAP) in asphalt mixes, as well as further additions to its mobi
    Read More
  • Innovative low temperature asphalt and aggregate options and advances
    May 16, 2014
    Studies show the asphalt sector has options for materials use that can lower costs and emissions, as well as increasing the use of recycling One study in the UK led by the Carbon Trust and Lafarge Tarmac has found that low temperature asphalt (LTA) could be used as an alternative to conventional asphalt on roads. Conventional asphalt is made when aggregates and bitumen are bound together at temperatures of between 180ºC-190ºC. However, the trial found that the alternative is able to bond road materia
    Read More
  • A breakthrough in the horizontal reuse of PA (porous asphalt)
    May 12, 2016
    An ambitious objective has led to significant steps in the reuse of PA (porous asphalt). While the market incidentally produces PA with a maximum of 30% of recovered raw materials, BAM has introduced its own innovations, enabling more than 90% of raw materials to be reused. And this year, subsidies from the European Commission will enable the LE2AP demonstration project to be constructed: one kilometre of sustainable PA. Large-scale production is also being developed.
    Read More

Highlighted Content