Haver & Boecker customises Tyler T-Class Vibrating Screen

Haver & Boecker Canada says it now customises to order its two-bearing Tyler T-Class vibrating screen for a wide range of materials with a top size of 406mm minus. The T-Class machine has a cut size range of 20 mesh to 152.5mm minus. It also has a sheave combination and drive belts for power, according the Canadian manufacturer - formerly WS Tyler. Add-on components include a dust enclosure, spray system, ball trays, special paint systems and more. Additionally, Haver & Boecker manufactures the machine with
April 16, 2018 Read time: 3 mins
Haver & Boecker's new screen
7142 Haver & Boecker Canada says it now customises to order its two-bearing Tyler T-Class vibrating screen for a wide range of materials with a top size of 406mm minus. The T-Class machine has a cut size range of 20 mesh to 152.5mm minus. It also has a sheave combination and drive belts for power, according the Canadian manufacturer - formerly WS Tyler. Add-on components include a dust enclosure, spray system, ball trays, special paint systems and more. Additionally, Haver & Boecker manufactures the machine with a stainless steel construction, on a skid mount or as a stationary or portable structure.


Size options range from 1.2m x 2.4m and up to 2.4m x 6m, as well as 2.4m x 7.3m with a twin shaft. The standard model is inclined at 20°, but variations between 15-25° are available.

The unit’s body has non-welded side plates which eliminate cracking along the seams, according to the company. The shaft housing includes extra-wide flanges for Huck bolting through the tube housing flange, side plate and side plate stiffener. This allows maintenance crews to keep the factory seal and creates a very rigid and solid connection to resist the area’s high bending moments.

Haver & Boecker designed the side plates to extend behind the bearing housing, allowing the 425.5mm-high tensile strength bolts to sandwich the side plate, reinforcing plate, shaft housing and bearing housing together. This creates even more stiffness in the middle of the machine where it’s most required to withstand bending and twisting.

The manufacturer also forms the reinforcing plate with 90° vertical edges to give the side plate stiffness from top to bottom, tying the upper and lower decks together for additional strength. Rigid body brackets manufactured to withstand large static and dynamic loads support the body weight and carry through to the springs, ensuring smooth operation.

Haver & Boecker equips every cambered deck on a T-Class with its Ty-Rail quick-tensioning system, which cuts screen media change-out time by about half. Each Ty-Rail package includes two tension rails, eight angle boxes and eight bolts. To remove the tension rails, an operator loosens the bolts on each, shifts the angle box gates up and lifts the rail and bolts out as one piece.

The T-Class can be paired with any type of screen media, including Haver & Boecker’s Tyler engineered media, including the long wear life of Ty-Wire, Ty-Max and Ty-Deck.

Haver & Boecker also offers the Pulse vibration analysis programme to monitor the ongoing health of vibrating screens through real-time views, logged reports and data analysis. It’s designed by Haver specifically for vibrating screens to catch small inconsistencies before they grow into big problems that result in downtime.

Materials

For more information on companies in this article

Related Content

  • Advances in mobile crushing delivers cost savings
    February 29, 2012
    New and improved mobile crushing and screening equipment is focused on delivering cost/tonne reductions in aggregate production - Geoff Ashcroft reports. The level of technology being applied to mobile crushing and screening systems continues to advance, which is indicative of manufacturer confidence in this sector as one that continues to offer an economic benefit. An example of how electronic technology can lead to greater productivity can be found with KPI-JCI - the firm has introduced a high resolution
    Read More
  • Pre-stressed bridge decks use modular formwork system
    July 9, 2012
    Imaginative formwork, often using modular components, is helping to shape some challenging bridges worldwide. Patrick Smith reports Traffic volumes in and around Prague have swollen massively in recent years, pushing the existing road network to the limits of its capacity. To permanently ease congestion in the Czech capital's centre, a multi-lane orbital motorway is under construction as a high capacity bypass for central Prague and to link up all the motorways and other major highways radiating from the ci
    Read More
  • Rolling out new and improved concrete pavers
    February 10, 2012
    Paver innovations The manufacturers are also rolling out several new and improved concrete paving models, with versatility and adaptability high on the agenda. GOMACO is now offering a novel independent IDBI attachment that allows dowel bar insertion behind a paver to form the transverse joint. The IDBI attachment is a new generation bar insertion system.
    Read More
  • Technology makes materials testing quicker and easier
    February 14, 2012
    Sophisticated technology is now being used to make the testing of a wide variety of materials quicker and easier as Patrick Smith reports. Ever since the CE mark became mandatory for asphalt mixes, it also became necessary and important to update the testing equipment and systems used for testing such materials.
    Read More

Highlighted Content