Skip to main content

'Blinding success' at Welsh quarry

Wales is renowned for many things but dry weather is not one of them. A combination of being close to the Atlantic and having lots of mountains means that it rains a lot and this is bad news when fine screening limestone using conventional steel wire mesh, which tends to clog and blind over in damp weather.
February 14, 2012 Read time: 3 mins
Trellex TFX rubber mats from Metso were fitted at Hanson's Forestwood quarry.
Wales is renowned for many things but dry weather is not one of them. A combination of being close to the Atlantic and having lots of mountains means that it rains a lot and this is bad news when fine screening limestone using conventional steel wire mesh, which tends to clog and blind over in damp weather.

This was the problem facing 2644 Hanson's Forestwood quarry in Pontyclun, County Mid-Glamorgan. The blinding led to potential size and cleanliness quality problems with finished products, with the 10mm and smaller fractions in danger of being out of specification. It also meant that two or three times a day in bad weather the screen would have to be shut down and site engineers asked to climb into the screen and clear the blinding using rubber mallets. Taking up to an hour each time, this unpleasant job in a confined space also resulted in a significant loss of productivity, estimated to be between 20,000-30,000 tonnes/year.

A new system, the Trellex TFX rubber mats from 6934 Metso, was fitted.

Specified and supplied by Metso's area manager Gareth Brooks, Trellex TFX is said to excel in conditions of up to 7% moisture thanks to its extreme flexibility, which helps to prevent the material from blinding over.

Forestwood Quarry was opened in the 1950s and acquired by Hanson in 2001. The quarry's plant was installed in the late 1990s by Unifloc and consists of a BJD rotary impact crusher, a SBM rotary impactor and four Hewitt & Robins screening modules. A team of ten men extract and process 250,000 million tonnes of limestone a year.

One of eight Hanson quarries in the area, products include 40mm, 28mm, 20mm, 14mm, 10mm, 6mm and dust, which are used for base course material, drainage material, capping and aggregate for a premix concrete plant that shares the site with the quarry.

"We were having a terrible problem with the Module 4 fine screen that produces 10mm, 6mm and dust," says production supervisor Richard Grey. "It was constantly blinding up in wet weather. The Trellex TFX system was more expensive but as it needs almost no unclogging and therefore no production stoppages the payback in terms of increased efficiency was very rapid." The Trellex TFX system is available in several thicknesses with molded and punched apertures. Installed on screens with longitudinal supports, they can be fitted on cross and longitudinally tensioned screening machines. Their effectiveness is said to lie in the extreme flexibility of the rubber screen 'cloth', where constant movement inhibits the material from blinding or pegging. The mats are reinforced with integral cords that maintain tension and provide accurate separations. No deck modifications are needed to the screen and panels are fitted with wear strips to protect the panel from wear from the camber bars.

"Metso supplied two of its own engineers to fit the new deck and ensure it was installed properly. They also showed our fitters how to install and maintain them correctly. Since then the Trellex TFX mats have been largely trouble free. No screen can cope in extremely wet conditions, and even the Trellex TFX mats can blind over. But with the rubber system blinding is a rare exception (only twice in eight months) rather than a twice daily occurrence.

"This guarantees that the aggregates are clean and of the right size whatever the weather," says Grey.

For more information on companies in this article

Related Content

  • 100th Warrior 2400 mobile screen delivered to Oman
    December 3, 2013
    Powerscreen has delivered its 100th Warrior 2400 mobile screen to its Oman distributor General Engineering Services (Genserv). One of Oman’s leading infrastructure companies, Galfar Engineering SAOG, originally requested a scalping plant from Genserv. Galfar required machines capable of providing output capacities ranging from 700-900tonnes/hour and, more importantly, that were mobile as they planned to use them for roads and building projects across Oman. Genserv recommended the Warrior 2400 scalping s
  • Terex Washing System’s bespoke plant for Paterson’s Quarries
    August 23, 2013
    A Terex Washing Systems (TWS) 150tonnes/hour recycling wash plant has recently been installed for Paterson’s Quarries in the UK. The bespoke plant is now up and running ten hours plus each day at the firm’s Greenoakhill Quarry & Recycling Centre in Glasgow. It is processing construction, demolition and excavation waste to produce four grades of stone and two grades of sand.
  • Aggregate machinery makers raise the efficiency bar
    May 22, 2018
    Manufacturers of crushers and screens are making their equipment more efficient as well as quieter. Among new entrants into the jaw crusher market is the MC 120 Pro, from Writgen company Kleemann. It was launched last September at the industry trade fair in Homberg/Nieder-Ofleiden, Germany. Both the diesel-electric jaw crusher – operating as part of an interlinked machine combination additionally comprising the MCO 11 PRO cone crusher and MS 953 EVO screening plant – and the MBRG 2000 granulator showed off
  • New asphalt recycler from IROCK
    September 26, 2013
    IROCK says that its RDS-15 mobile crusher suits duties in recycled asphalt applications. This horizontal impact crushing plant is said to be highly mobile and versatile. The rapid deployment system (RDS) the firm has developed is said to increase transportability from site to site and cut set-up times when the equipment arrives on-site. The RDS-15 is said to be ideal for processing smaller materials such as reclaimed asphalt pavement (RAP). Versatile and compact, this crushing and screening system provid