Upgrading a Benninghoven asphalt plant with new technology

Benninghoven plant owned by Breisach-based Johann Joos Tief- und Straßenbauunternehmung is 40 years old but now features new technology, increasing its range of capabilities. To meet demands for the use of RAP, the plant has been reconfigured with the latest technology from Benninghoven. This new addition to the plant will allow its facility as a Recycling Priority Plant (RPP). The plant upgrade features a Benninghoven BA 4000 system with a capacity of up to 320tonnes/hour.
October 18, 2017 Read time: 2 mins
The Benninghoven asphalt plant upgrade will boost quality and RAP capabilities for the contractor

Benninghoven plant owned by Breisach-based Johann Joos Tief- und Straßenbauunternehmung is 40 years old but now features new technology, increasing its range of capabilities.

To meet demands for the use of RAP, the plant has been reconfigured with the latest technology from 167 Benninghoven. This new addition to the plant will allow its facility as a Recycling Priority Plant (RPP).

The plant upgrade features a Benninghoven BA 4000 system with a capacity of up to 320tonnes/hour. It is equipped with a parallel counterflow drum, providing indirect heating of the RAP. This configuration ensures that the bitumen contained within the RAP is not damaged by direct heating. According to the firm, this layout allows higher RAP percentages (as much as 90% is claimed) to be processed in the mix than with conventional plants.

At the same time, the plant also meets the latest German emissions requirements. Asphalt produced by the plant is at a temperature of 160°C, while its efficient operation is said to deliver major savings in fuel consumption. According to Benninghoven, the configuration of the counterflow drum and the indirect hot gas heating system ensures that product quality is maximised while exhaust and heat emissions are minimised, boosting overall efficiency.

In addition to the hot feed system with its parallel drum and hot gas generator, the plant has also been retrofitted with a cold feed system: a multivariable feed hopper for a RAP material rate of up to 40%. Meanwhile, the preliminary batching units and other components from the previous plant were retained.

The plant has an EVO JET 4 combination burner for oil and coal dust delivering 23.7MW. It has a six-level screening system as well as a hot bin section with a capacity of 170tonnes in seven bins and mixed material storage silos holding 420tonnes. Other new components included a full enclosure around the plant, a filler tower and the latest Benninghoven BLS 3000 control system.

Materials

For more information on companies in this article

Related Content

  • Effective crushing and screening key to quality
    February 22, 2012
    Efficient crushing and screening processes help produce quality products, Mike Woof reports. Having an efficient crushing and screening operation is crucial to the cost-effectiveness of a quarry as well as providing the best quality product. The crushing circuit is a key component in any quarry with the right selection of equipment as well as effective maintenance important factors in optimising performance.
    Read More
  • Caterpillar’s new twin drum asphalt compactor
    October 2, 2018
    Caterpillar is introducing a new rubber tyred compactor designed for use on granular materials and all types of asphalt-mix designs. The firm says that its new CW16 pneumatic roller is available as a standard nine-wheel model with a 1754mm compaction width or as an optional 11-wheel model with a 2,132mm compaction width. The CW16 is designed for efficient performance on highways, city streets, county roads, lane additions, industrial sites, overlays, or other mid-size jobs. Depending on ballast used (inclu
    Read More
  • MT 3000-2i from Vögele - now with Offset PowerFeeder version
    April 15, 2016
    Designed to optimise throughput, the MT 3000-2i from Vögele is now available with an Offset PowerFeeder version. This highly productive material transfer vehicle helps ensure homogeneity and quality in high output paving operations such as for highways. Its large hopper and innovative conveying system are key features that allow a 35tonne storage capacity and high throughput. Its maximum conveying capacity is 1,200tonnes/hour, allowing the machine to handle the full load from a 25tonne capacity asphalt deli
    Read More
  • INTERMAT launch for Ammann UniBatch asphalt mixing plants
    January 6, 2017
    Ammann is using INTERMAT to reveal its UniBatch range of asphalt mixing plants. With capacities from 80-350 tonnes/hour, this new plant type incorporates flexibility, and a larger selection of modules to allow the system to be expanded as required. Energy efficiency and reduced emissions are key elements of the UniBatch range, which is said to be is compatible with all of Ammann's recycling technologies. Mixer capacities extend from 1.3-4.3tonnes, hot silo storage is from 45-120tonnes and mixed material sto
    Read More

Highlighted Content