Skip to main content

Shell Bitumen’s new technology cuts air-polluting emissions by 40%

Shell Bitumen has developed molecular technology that cuts 40% of air-polluting emissions -Kristina Smith reports Shell Bitumen is launching a new technology which drastically reduces the amount of harmful air pollutants produced when asphalt mixes are manufactured and laid on the roads. Called Shell Bitumen FreshAir, it reduces six of the seven pollutants produced by at least 40%. The seventh, ozone, is produced in too small an amount to measure changes. “The World Health Organisation has said that 90%
May 15, 2019 Read time: 4 mins
The Shell Bitumen FreshAir product has been tested in the Netherlands and Thailand
Shell Bitumen has developed molecular technology that cuts 40% of air-polluting emissions -Kristina Smith reports


763 Shell Bitumen is launching a new technology which drastically reduces the amount of harmful air pollutants produced when asphalt mixes are manufactured and laid on the roads. Called Shell Bitumen FreshAir, it reduces six of the seven pollutants produced by at least 40%. The seventh, ozone, is produced in too small an amount to measure changes.

“The 3263 World Health Organisation has said that 90% of people are living with lower-than-acceptable air quality,” said Shell Bitumen’s general manager of bitumen technology, Professor John Read. “While there’s no silver bullet, no single technology that’s going to cure the world of these problems, every industry has to do it’s bit to become as clean as possible.”

The launch comes shortly after new research, published in the European Heart Journal in March 2019, estimates that 790,000 people/year in Europe alone die prematurely due to ambient air pollution. Worldwide, the problem is huge. Research published in the Proceedings of the National Academy of Sciences in the US in September 2018 estimates that 8.9 million people died in 2015 due to air pollution.

Although construction does not account for a large proportion of the world’s air pollution, it can lead to localised peaks in bad air quality. Shell has been speaking to the UK Government’s environmental department Defra, says Read, about how construction works can push pollution levels over safe levels in areas where concentrations are already significant. Shell Bitumen’s technology would also make life better for those living and working close to asphalt plants.

Shell discovered the potential for reducing air pollutants around three years ago when it was carrying out trials of its Shell Bitufresh product, which removes the odours from asphalt, in China. Bitufresh technology works by attaching heavy molecules from the Bitufresh to mercaptans, which cause the smell in bitumen, and making them sink to the bottom of the bitumen so that they aren’t released.

To create Bitumen FreshAir, Shell had to make further changes to the chemistry so that it targeted the right components of the bitumen. This involved 2,500 tests at Shell’s R&D centre in Bangalore, India and five live trials in different countries. Researchers worked with over 20 different bitumens from different locations around the world, made by Shell and by others.

“We had to show that the effect we were seeing was a real effect across any bitumen, any mixing plant, any storage conditions, in any location,” says Read. “It took an awful lot of work from a statistical point of view.”

The pollutants that FreshAir tackles are nitrogen oxides, sulfur dioxide, volatile organic compounds (VOCs), particulate matters at 2.5 and 10 microns and carbon monoxide. One the technology had been shown to work widely in the laboratory, Shell carried out trials in the UK, the Netherlands, France, Thailand and Hong Kong, employing independent air quality consultancy DustScanAQ to carry out the tests at every location to ensure uniformity.

DustScan’s readings showed a 40% reduction in the pollutants, less than the laboratory results which were as high as        80-90%, said Read.

Shell will be launching FreshAir this year in the five countries where it conducted trials, along with Germany and Hong Kong. Next year, it plans to launch it into other countries too.

Depending on the local demand, the FreshAir technology can be added into road tankers or via an online dosing system installed at depots. Eventually there may come a point when it doesn’t make economic sense to switch between standard and low-polluting bitumen, at which point Bitumen FreshAir could become the default, says Read.

Shell Bitumen FreshAir will cost more than standard bitumen, although Read would not say by how. “It’s not huge,” he said. “We are not trying to use this to make massive amounts of money, that’s not the intent. It’s about having cleaner solutions. There is new technology in there, it costs us money to bring that to commercialisation, so we do need to charge more so that we can keep investing in research and development.”

Shell Bitumen is investing in several research projects that fit with Shell’s overarching aim to find “more and cleaner energy solutions”. These include looking at how many times a pavement can be recycled; using plastic waste in roads and what the long-term impacts could be; and ways to use crumb rubber in asphalt mixes at low temperatures.

Read also hinted that a new technology that would increase the lifetime of pavements is under development. However, he would not give details, as the patents for the product are not yet in place.

For more information on companies in this article

Related Content

  • Professional Pavement Products’ LaneAlert 2x grabs ATSSA award
    June 27, 2018
    LaneAlert 2x, the latest safety system from Professional Pavement Products, has won the Most Innovative Product award from the American Traffic Safety Services Association (ATSSA). Professional Pavement’s LaneAlert 2x is a bi-directional marking that displays two distinct messages, Depending on which way the driver approaches, he or she will see only one message. Professional Pavement, headquartered in Jacksonville in the US state of Florida, makes safety products including road markings and also distribu
  • Electric power projects planned
    January 26, 2018
    While diesel engines continue to be developed, there is no mistaking the current plans for electric driveline projects - Mike Woof writes The growing worldwide consensus on the massive threat to humanity posed by climate change means that the need to reduce exhaust emissions from transport and construction is becoming ever more pressing. As a result, industry is changing and new solutions are being found for transport and construction that will help lower environmental impact. Although many solutions are
  • Caterpillar has a Vision that includes total project site overview
    April 5, 2016
    Caterpillar may be on its financial back foot, but a recent event showed the company has a vision far beyond this or the next financial year – David Arminas reports. Many construction machinery manufacturers have some data collection and analysis systems for their heavy equipment. For a good decade, manufacturers have been moving in this direction, first as retrofit packages on machines in the field and increasingly as standard on newer models. Caterpillar is no exception among manufacturers that are movin
  • Benninghoven’s burning ambition for LEP’s future
    September 30, 2013
    Benninghoven, the leading asphalt plant and accessories manufacturer, believes the greater use of Lignite Energy Pulverized (LEP) during asphalt plant production will ensure huge long-term financial savings for plant operators currently using alternative combustibles. Guy Woodford reports The claimed impact of LEP on the German asphalt plant market is impressive. As reported in the July-August 2013 issue of World Highways, 80% of all asphalt plants operated in the country are said by LEP Europe-wide