Skip to main content

Shell Bitumen’s new technology cuts air-polluting emissions by 40%

Shell Bitumen has developed molecular technology that cuts 40% of air-polluting emissions -Kristina Smith reports Shell Bitumen is launching a new technology which drastically reduces the amount of harmful air pollutants produced when asphalt mixes are manufactured and laid on the roads. Called Shell Bitumen FreshAir, it reduces six of the seven pollutants produced by at least 40%. The seventh, ozone, is produced in too small an amount to measure changes. “The World Health Organisation has said that 90%
May 15, 2019 Read time: 4 mins
The Shell Bitumen FreshAir product has been tested in the Netherlands and Thailand
Shell Bitumen has developed molecular technology that cuts 40% of air-polluting emissions -Kristina Smith reports


763 Shell Bitumen is launching a new technology which drastically reduces the amount of harmful air pollutants produced when asphalt mixes are manufactured and laid on the roads. Called Shell Bitumen FreshAir, it reduces six of the seven pollutants produced by at least 40%. The seventh, ozone, is produced in too small an amount to measure changes.

“The 3263 World Health Organisation has said that 90% of people are living with lower-than-acceptable air quality,” said Shell Bitumen’s general manager of bitumen technology, Professor John Read. “While there’s no silver bullet, no single technology that’s going to cure the world of these problems, every industry has to do it’s bit to become as clean as possible.”

The launch comes shortly after new research, published in the European Heart Journal in March 2019, estimates that 790,000 people/year in Europe alone die prematurely due to ambient air pollution. Worldwide, the problem is huge. Research published in the Proceedings of the National Academy of Sciences in the US in September 2018 estimates that 8.9 million people died in 2015 due to air pollution.

Although construction does not account for a large proportion of the world’s air pollution, it can lead to localised peaks in bad air quality. Shell has been speaking to the UK Government’s environmental department Defra, says Read, about how construction works can push pollution levels over safe levels in areas where concentrations are already significant. Shell Bitumen’s technology would also make life better for those living and working close to asphalt plants.

Shell discovered the potential for reducing air pollutants around three years ago when it was carrying out trials of its Shell Bitufresh product, which removes the odours from asphalt, in China. Bitufresh technology works by attaching heavy molecules from the Bitufresh to mercaptans, which cause the smell in bitumen, and making them sink to the bottom of the bitumen so that they aren’t released.

To create Bitumen FreshAir, Shell had to make further changes to the chemistry so that it targeted the right components of the bitumen. This involved 2,500 tests at Shell’s R&D centre in Bangalore, India and five live trials in different countries. Researchers worked with over 20 different bitumens from different locations around the world, made by Shell and by others.

“We had to show that the effect we were seeing was a real effect across any bitumen, any mixing plant, any storage conditions, in any location,” says Read. “It took an awful lot of work from a statistical point of view.”

The pollutants that FreshAir tackles are nitrogen oxides, sulfur dioxide, volatile organic compounds (VOCs), particulate matters at 2.5 and 10 microns and carbon monoxide. One the technology had been shown to work widely in the laboratory, Shell carried out trials in the UK, the Netherlands, France, Thailand and Hong Kong, employing independent air quality consultancy DustScanAQ to carry out the tests at every location to ensure uniformity.

DustScan’s readings showed a 40% reduction in the pollutants, less than the laboratory results which were as high as        80-90%, said Read.

Shell will be launching FreshAir this year in the five countries where it conducted trials, along with Germany and Hong Kong. Next year, it plans to launch it into other countries too.

Depending on the local demand, the FreshAir technology can be added into road tankers or via an online dosing system installed at depots. Eventually there may come a point when it doesn’t make economic sense to switch between standard and low-polluting bitumen, at which point Bitumen FreshAir could become the default, says Read.

Shell Bitumen FreshAir will cost more than standard bitumen, although Read would not say by how. “It’s not huge,” he said. “We are not trying to use this to make massive amounts of money, that’s not the intent. It’s about having cleaner solutions. There is new technology in there, it costs us money to bring that to commercialisation, so we do need to charge more so that we can keep investing in research and development.”

Shell Bitumen is investing in several research projects that fit with Shell’s overarching aim to find “more and cleaner energy solutions”. These include looking at how many times a pavement can be recycled; using plastic waste in roads and what the long-term impacts could be; and ways to use crumb rubber in asphalt mixes at low temperatures.

Read also hinted that a new technology that would increase the lifetime of pavements is under development. However, he would not give details, as the patents for the product are not yet in place.

For more information on companies in this article

Related Content

  • Iterchimica’s cross-linking agents boost PMB performance
    September 19, 2019
    Cross-linking agents can vastly improve the stability and performance of polymer-modified bitumen (PMB), according to additive specialist Iterchimica. Modified bitumen can become unstable when it is stored inside a tank because the polymer rises to the top, meaning that the rheological behaviour of the bitumen varies through the tank. Cross-linking agents modify bitumen through a chemical action that stabilises the bitumen inside the tank to create a homogenous PMB and hence, a homogeneous asphalt concr
  • Germany’s B-85 gets the treatment from Bomag’s BM 2200/75 planer
    February 23, 2018
    By this spring, Bomag’s new BM 2200/75 cold planer will have removed all the old pavement from a 2.6km section of Germany’s federal highway B-85. Work on the section between Amberg and Pittersberg started at the end of 2016 after the Ministry of Transport classified the road as being in “urgent need” of upgrading as part of the Federal Transport Infrastructure Plan. Actual roadworks began in mid-June 2017 after essential forestry work had been carried out, such as the removal of tree roots on both sides
  • BOMAG’s cleaner milling machine
    November 28, 2018
    BOMAG has developed a novel system for reducing dust levels around its milling machines. Called the Ion Dust Shield, this patented system uses ionisation to positively charge dust particles from milled cuttings. The firm says that current dust extraction technology for milling machines focuses on minimising dust levels around the operator. These ensure that the working area is kept free from dust, with this retrieved material then being exhausted to the discharge conveyor, typically at a height of around 5m
  • Arizona Chemical study reveals lower CO2 footprint with RAP additive
    May 18, 2015
    A life-cycle assessment has found that an asphalt mix containing a high percentage of reclaimed asphalt pavement (RAP) along with an additive by Arizona Chemical can produce a significantly lower carbon footprint than virgin asphalt mix or a mix containing a low percentage of RAP. The assessment study was carried out by third party Arthur D. Little, an international management consulting firm, using Arizona Chemical’s SYLVAROAD RP 1000 performance additive. The work noted that cradle-to-gate, a road aspha