Skip to main content

New Benninghoven plant in Norway

A new asphalt plant in Norway is helping to further the use of recycled asphalt in high-quality mixes for road construction.
March 21, 2023 Read time: 3 mins
The Benninghoven plant was installed within a tight timeframe, despite tough conditions

The Benninghoven RPP 4000 plant is being used to supply material for the new highway section of the E39 between Mandal East and Kristiansand West. Velde Produksjon opted to purchase an innovative RPP 4000 asphalt mixing plant, which met with the firm’s need for equipment able to deliver high recycling rates combined with low emissions. The use of this green technology has been supported by the state agency Enova in the form of a grant. Enova supports companies that opt to use innovative, climate-friendly technologies.

The highway section between Mandal and Kristiansand is part of a gigantic construction project for better access to the west coast of Norway. The new Benninghoven RPP 4000 plant is located directly at the Mandal Fjord in Brennevinsmyra and has its own jetty. This modern asphalt mixing plant has been in operation since August 2021. Equipped with a recycling drum with a hot-gas generator using counterflow action, it allows for up to 100% recycling material to be added while complying with the standard emission limits.

“With innovation, curiosity and investments in modern technologies, Velde will ensure the most efficient and environmentally friendly production possible,” said Egil Velde, CEO Velde Industri.

The relationship between Velde and Benninghoven goes back as far as 2005. Velde has evolved from a medium-sized company into Norway’s second largest mixing plant owner. The installation of a Benninghoven plant at the firm’s Sandnes quarry provided a way into asphalt production, and only a short time later the company decided to purchase a second plant. In February 2019, Velde took over an existing asphalt mixing plant in Agder county, well positioned for the Mandal–Kristiansand road job. This plant was too small though, so the firm decided to replace it with a larger unit, opting for the new Benninghoven plant in the same location.

Velde has set itself the goal of reducing the carbon footprint of asphalt production with innovative technology and decided that the RPP concept met its needs. Due to the detailed technical description from Benninghoven, Velde was able to secure the support from Enova.

The Enova state agency was founded in 2001 with the aim of driving the transition to more environmentally friendly consumption and sustainable production in the energy sector. The company has been affiliated with the Department for Climate And the Environment since 2018.

The plant has a number of special features including a loading silo for stocking large quantities of material, a recycling drum that uses counterflow action with a hot-gas generator and housing for all hoppers. It also offers the option for cold recycling with a multi-variable feed, has a dust collection system that meets new emissions requirements, has low operating costs and low Ctot emissions compared to conventional systems. In addition, the plant features a wood dust burner and a production capacity of 320tonnes/hour.

Due to the tight schedule for the motorway job, Velde was under time pressure and needed the plant installed quickly. It took less than a year until the new plant was commissioned in August 2021, despite COVID-19 rules on quarantine and immigration restrictions, as well as the tough winter weather conditions.

For more information on companies in this article

Related Content

  • Lintec asphalt plants for Egypt and the Philippines
    December 1, 2023

    Egyptian firm Rsquared Construction has been using a Lintec CSD2500B asphalt plant to assist with material supply for a road project in the south of the country. The Lintec CSD2500B plant’s first task was to supply material for a short but important road link. The firm, Rsquared Construction, selected the model for its ease of transport and low fuel consumption.

  • Lintec developing novel asphalt plant solutions
    March 16, 2016
    Highly innovative, LINTEC’s new LEP 95 system is a new, patented warm mix asphalt solution. This can be configured to produce both hot and warm mix asphalt depending on demand at the job site. A major reduction in energy consumption and emissions can be achieved by the LINTEC system working in a temperature range of 95°C-100°C. This unitcan be fitted to new or existing plants and is said to produce a smooth and stable foam for an optimum mixing result at low temperatures, while it is reliable and has low ma
  • New Astec asphalt plant for Mexico City
    December 19, 2017
    Astec has commissioned a highly sophisticated asphalt plant in Mexico City to meet specific customer needs for a high quality output with minimal environmental impact. Equipped with Astec’s latest technology, this is a low emissions plant and is the first in Latin America that features the firm’s V-Pack Stack Temperature Control. The low emissions performance was a key factor in the supply deal, so as to meet the needs of the authorities in Mexico City. The plant is equipped with Astec’s Phoenix Talon low
  • Sophisticated concrete plants coming to market
    July 28, 2015
    Concrete production technology is advancing as new systems come to market – Mike Woof reports The efficient production of high-quality concrete is crucial to many construction projects. Whether high-output plants are being used for large bridge or tunnel projects, or smaller mobile units are being used to supply specific operations such as central reservation barrier installation, the quality of the product is vital. Production technology has improved across the board due to the introduction of new systems.