Iterchimica’s cross-linking agents boost PMB performance

Cross-linking agents can vastly improve the stability and performance of polymer-modified bitumen (PMB), according to additive specialist Iterchimica. Modified bitumen can become unstable when it is stored inside a tank because the polymer rises to the top, meaning that the rheological behaviour of the bitumen varies through the tank. Cross-linking agents modify bitumen through a chemical action that stabilises the bitumen inside the tank to create a homogenous PMB and hence, a homogeneous asphalt concr
September 19, 2019 Read time: 3 mins
Iterchimica compared the performance of a polymer modified bitumen with and without a cross-linking agent, ITERFORT PH20
Cross-linking agents can vastly improve the stability and performance of polymer-modified bitumen (PMB), according to additive specialist Iterchimica.


Modified bitumen can become unstable when it is stored inside a tank because the polymer rises to the top, meaning that the rheological behaviour of the bitumen varies through the tank. Cross-linking agents modify bitumen through a chemical action that stabilises the bitumen inside the tank to create a homogenous PMB and hence, a homogeneous asphalt concrete.

Iterchimica produces two cross-linking agents: ITERFORT PH20, a solid which can be added to the pre-blend tank at between 0.15-0.25% of the bitumen weight and ITERFORT PH17, a liquid which is poured into the tank at between 0.4-0.6% of the bitumen weight.

Tests for a customer in Uganda demonstrate the impact that cross-linking agents can have. Researchers compared bitumen modified with ITERPRENE SBS-GR at 2%, with and without ITERFORT PH20 at 0.2%. Results showed that the softening point increased from 58.4°C to 63.6°C, the viscosity at 165°C increased from 0.29 Pa*s to 0.46 Pa*s and the elastic recovery at 25°C increased from 63% to 65%.

Stability is verified using a test called the cigar tube test (from EN 13399) which is based on the softening point parameter. The PMB is put into a cigar-type tube which is stored in the oven for three days at 170°C. Samples from the top and bottom of the cigar are compared and the PMB is considered stable when the difference between the softening point of the samples is lower than 5°C.  In the Ugandan example, the difference between the softening point at the top and at the bottom was 7°C without a cross-linking agent and 0.3°C with the cross-linking agent.

The right type of polymer is usually chosen by analysing the chemical composition of bitumen according to the ASTM D4124-09 specification and depends on its SARA (saturate, aromatic, resin and asphaltene) index. But the final performance of the PMBs are also connected with the phase inversion – that is whether the polymer and bitumen have become one material with the combined properties of the two original ones.  

Cross-linking agents can increase the quality and stability of the phase inversion. Considering the many differences of the bitumen coming from various places, it is important to carry out the stability test for every different source of bitumen, said Iterchimica.

Materials

Related Content

  • Bitumen balance in RAP
    November 29, 2012
    *Bitumen from recycled asphalt can be rejuvenated using additives, according to Iterchimica The use of reclaimed asphalt pavement (RAP) is common in many countries. However, the aged bitumen from RAP has a lower penetration and is more viscous than when first mixed. This reclaimed bitumen is generally balanced by the addition of fresh binder that is softer than those typically used to produce hot mixes. But balancing penetration and softening point or viscosity will not deliver bitumen identical to the orig
    Read More
  • Bitumen additives raise environmental questions
    February 14, 2012
    New products, including additives, are coming onto the market to help reduce the cost of producing bitumen. Patrick smith reports. According to Eng. Paolo Visconti of Iterchimica, environmental issues and the health and safety of operators of manufacturing plants and workers laying bituminous mixes have raised long debates on the possible harmfulness of fumes which are emitted when heating these mixes at the temperatures (160-180°C) required for their production. "If, on the one hand, the effects on operato
    Read More
  • Bitumen provides more durable road surface
    April 5, 2012
    When the main commuter route into Cardiff, the Welsh capital, began to suffer from acute deformation, the Vale of Glamorgan Council required a durable and faster alternative to hot rolled asphalt to ensure minimum disruption for local road users.
    Read More
  • How bitumen technology is helping roads do more
    November 14, 2016
    From lightening tunnels to keeping racing cars on tracks to preventing ice from forming, bitumen technology is helping roads do more - Kristina Smith reports If you think bitumen is just bitumen, useful for sticking lumps of aggregate together, it’s time to think again. The ever-widening and ever-more-sophisticated range of technologies and additives available means that we can ask our road surfaces to do more than ever.
    Read More

Highlighted Content