Stable site

A Wirtgen soil stabilisation machine has been treating a 100,000m2 site in Staffordshire for an advanced logistics centre, a project including access roads and parking areas. The WR2500S recycler is being used to prepare the way for the vast Blue Planet complex in Chatterley Valley, Newcastle-under-Lyme. Throughout the preliminary groundworks the Wirtgen machine, purchased by Barton Plant of Kettering, Northamptonshire, has placed between 6-7,000m2/day of lime/cement stabilised earth on the project, for mai
July 23, 2012 Read time: 2 mins
A 2395 Wirtgen soil stabilisation machine has been treating a 100,000m2 site in Staffordshire for an advanced logistics centre, a project including access roads and parking areas. The WR2500S recycler is being used to prepare the way for the vast Blue Planet complex in Chatterley Valley, Newcastle-under-Lyme. Throughout the preliminary groundworks the Wirtgen machine, purchased by Barton Plant of Kettering, Northamptonshire, has placed between 6-7,000m2/day of lime/cement stabilised earth on the project, for main contractor McLaren Construction. The WR2500S was also joined on site by two new Streumaster spreaders, also supplied by Wirtgen.

Barton began the works by stripping off 12,000m3 of topsoil, which was followed by a 25,000m3 cut-to-fill earthworks operation. The Wirtgen has been used to lay a 300mm thick cement/lime treated layer and externally this rises to 400mm thickness, while in the car park areas it is 250mm. These areas are trimmed variously to a sub-base tolerance of +10 to -30mm, or +10 to -20mm.

Barton owns an extensive earthmoving fleet and has invested in the new machines to meet the needs of the fast-growing ground stabilisation sector. With its 500kW rated 2796 Mercedes Benz V12 engine, the WR2500S has plenty of power for soil stabilisation as well as for pulverising or cold recycling. All-wheel-drive and hydraulic height adjustable wheels allow the WR2500S to handle difficult terrain while the four-wheel steering system allows an operator to choose between normal, crab-steer, or coordinated steering modes for use in cramped sites.
Recycling Materials

For more information on companies in this article

Related Content

  • Securing safer transportation infrastructure through non-destructive technology
    June 16, 2014
    Kevin Vine reports on the use of non-destructive testing for structural analysis of bridges Seven years ago, the overpass collapse in Laval, Québec that led to the death of five people brought to light severe issues with the state of the country’s bridges and transportation infrastructure. More recently, a crack in the Champlain Bridge to Montreal that forced over 160,000 commuters to find alternate routes to work reaffirmed a need for greater emphasis on early detection before a crisis occurs.
    Read More
  • Skyjack shows SJ1256 telehandler and SJ85 AJ articulating boom
    March 10, 2017
    Skyjack displayed its new SJ1256 telehandler and SJ85 AJ articulating boom at CONEXPO-CON/AGG. The SJ1256 TH telehandler lifts 12,000lb and has a 56.3 ft maximum lift height, with a 6,000lb lift capacity at maximum lift height without deploying outriggers and 7,000lb lift capacity with outriggers deployed. Maximum forward reach is 42.6 ft and the machine has a Tier-IV final 107hp Deutz TCD3.6L engine that uses diesel exhaust fluid, but requires no regeneration.
    Read More
  • Sakai puts rollers on show
    November 13, 2014
    Road construction equipment manufacturer Sakai will show off a number of compactors at bauma China, including its vibratory GW750 pneumatic tyre roller (PTR) and SV520 and SV520DF vibratory single drum rollers. The 9tonne GW750, claimed by Sakai to be the world’s first and only vibrator pneumatic tyred roller, offers four amplitude settings to achieve required density, and is powered by an Isuzu DD-4BG1T (Tier 2) engine with a rated power output of 78.8kW at 2,300rpm. The company says the GW750’s dynamic
    Read More
  • Sakai puts rollers on show
    January 6, 2017
    Road construction equipment manufacturer Sakai will show off a number of compactors at bauma China, including its vibratory GW750 pneumatic tyre roller (PTR) and SV520 and SV520DF vibratory single drum rollers. The 9tonne GW750, claimed by Sakai to be the world’s first and only vibrator pneumatic tyred roller, offers four amplitude settings to achieve required density, and is powered by an Isuzu DD-4BG1T (Tier 2) engine with a rated power output of 78.8kW at 2,300rpm. The company says the GW750’s dynamic
    Read More

Highlighted Content