Test track milling with Roadtec

A milling machine from Roadtec has carried out important work at the National Centre for Asphalt Technology (NCAT) test track in the US. The 2.7km NCAT test track is used for asphalt pavement testing and research. As the facility is important to the advancement of asphalt technologies, Roadtec donates its time, equipment and personnel to carrying out rehabilitation work at the test track. An RX900E model was donated by Roadtec to NCAT and was used by David Bussard and Charlie Butler to mill to depths from
September 11, 2018 Read time: 1 min

A milling machine from 1252 Roadtec has carried out important work at the National Centre for Asphalt Technology (NCAT) test track in the US. The 2.7km NCAT test track is used for asphalt pavement testing and research. As the facility is important to the advancement of asphalt technologies, Roadtec donates its time, equipment and personnel to carrying out rehabilitation work at the test track. An RX900E model was donated by Roadtec to NCAT and was used by David Bussard and Charlie Butler to mill to depths from 28.6mm to 1.07m. The machine had to mill the 8.5m-wide track in a number of passes and was fitted with a 2.2m- wide drum, featuring teeth on a 16mm spacing.

Recycling

For more information on companies in this article

Related Content

  • Roadtec’s RT-500 trailer: integral to cold in-place recycling
    August 4, 2017
    The Roadtec RT-500 is a mobile trailer that can be pulled and fed by a Roadtec RX-900 milling machine for cold in-place recycling. But it also can be set up on site as a central cold-mix plant, according to the company, based in the US state of Tennessee. The machine features closed loop sizing with an on-board vibratory screen and horizontal shaft impact crusher. The process is designed to prevent having to pre-process RAP when the RT-500 is used as a cold-mix plant. The RT-500 also has a weigh bridge on b
    Read More
  • Roadtec’s RT-500 trailer: integral to cold in-place recycling
    August 4, 2017
    The Roadtec RT-500 is a mobile trailer that can be pulled and fed by a Roadtec RX-900 milling machine for cold in-place recycling. But it also can be set up on site as a central cold-mix plant, according to the company, based in the US state of Tennessee. The machine features closed loop sizing with an on-board vibratory screen and horizontal shaft impact crusher. The process is designed to prevent having to pre-process RAP when the RT-500 is used as a cold-mix plant. The RT-500 also has a weigh bridge on b
    Read More
  • GPS control delivers more accurate compaction performance
    July 13, 2012
    The latest compaction technology offers users the benefits of more accurate performance by combining heat detection and compaction metering with GPS In Europe several leading manufacturers now offer more accurate compaction technology, with Ammann, BOMAG, Dynapac and Hamm all having developed advanced control packages. The technologies vary widely but the advantages are broadly similar, with smart compaction allowing the user a greater degree of control over the compaction process and delivering major reduc
    Read More
  • Wirtgen machines help with road recycling in Italy
    March 18, 2016
    One of the first Wirtgen W 200 Hi cold milling machines off the assembly line is now being used for road recyling work in southern Europe. The versatility of the machine due to its novel 400mm offset drum capability has proven extremely useful for the contractor in Italy. Tuscany–based Endi Asfalti is now using the large and highly productive W 200 Hi for a wide range of milling jobs that would previously have been carried out using a combination of large and small milling machines. The proven W 200 milling
    Read More

Highlighted Content