Asphalt milling machine gives a fine finish

High micro-milling results are said to be achievable using the new cutter from Roadtec. This product has been developed to meet the growing demand for thinner friction courses, which require proper surface preparation. Delamination of thin courses can occur when surfaces are prepared with conventional milling equipment, according to Roadtec. The firm adds that water can get trapped in the recesses of a conventionally milled surface, leading to premature pavement failure.
March 20, 2012 Read time: 2 mins
Fine milling finish can be achieved using the new cutting system from Roadtec
High micro-milling results are said to be achievable using the new cutter from 1252 Roadtec.

This product has been developed to meet the growing demand for thinner friction courses, which require proper surface preparation. Delamination of thin courses can occur when surfaces are prepared with conventional milling equipment, according to Roadtec. The firm adds that water can get trapped in the recesses of a conventionally milled surface, leading to premature pavement failure.

In thin overlay applications micro-milling is required for good results, so Roadtec developed this cutter, which is able to produce a fine, straight-line pattern and does not deviate with changes in travel speed or machine stops for truck changes. Tests of the surface have shown good results, while the milled surface texture is said to be safe for cars and motorcycles when opened to traffic before paving begins. Roadtec says tooth consumption is also low with its new cutter, and, on a recent job consisting of 8km of roadway (16 lane km), 25.4mm removal with a micro finish, no teeth were changed during the five-day project.
Recycling

For more information on companies in this article

Related Content

  • Technology helps earth moving and paving
    August 18, 2014
    Located in Meeker, Colorado and serving the area for air transportation is Meeker Airport, a C-II general aviation airport. The FAA designation of C-II means the airport can accommodate aircraft with wingspan of less than 24m. Runway 3-21 at the Rio Blanco county-owned Meeker Airport had reached a point of wear and deterioration that required full reconstruction and upgrades to remain compliant with the FAA’s C-II requirements.
    Read More
  • Maintaining Canadian roads in tough conditions
    September 27, 2017
    A number of units from the FAE Group are playing an important role in Canada, helping to maintain dirt and gravel roads. The MTH units are said to be performing well, despite the tough conditions, with hot weather in the summer and extremely low temperatures in winter. The units are being employed by Rural Municipality Wilton, a company that specialises in maintaining dirt and gravel roads. The company has a fleet of 130 machines that operate and maintain 700km of roads.
    Read More
  • Out of sight
    July 16, 2012
    With traffic volumes increasing around the world, many existing road links will need to be upgraded or replaced in coming years The need for new road tunnels is particularly intense in many dense urban areas, due to environmental requirements that mean new road links will have to be installed underground. However, improving existing road tunnel links is providing a very large part of the business for this specialised construction segment at present.
    Read More
  • GPS machine control speeds dangerous road improvement
    April 11, 2012
    A Canadian contractor has carried out major roadworks to improve safety on a dangerous stretch of road, using technology to complete the work smoothly. Wiltech Developments, located in West Kelowna, British Columbia, has a great deal of experience. In the contracting sector. The firm works in most. of British Columbia and currently owns more than 40 pieces of heavy machinery, with the majority of these units featuring Trimble Grade Control equipment, a move that has improved its operations.
    Read More

Highlighted Content