Skip to main content

Recycling materials for road construction

Recycled demolition material and vehicle tyres could be used for road construction.
By MJ Woof August 20, 2020 Read time: 2 mins
Once tyres have reached the end of their working life, they could be ground down to produce crumb rubber for use in construction - image © courtesy of Mike Woof


New research carried out in Australia suggests that road base material could be produced from recycled demolition rubble and old vehicle tyres.

With the tyres converted into crumb rubber and the rubble sorted, washed and crushed to a suitable size, the combination offers major benefits for road base construction.

According to research from RMIT University in Melbourne, Australia, mixing these materials can provide a suitable base course granulate that meets road engineering safety standards.

Using these materials could help address issues with recycling. The research shows that the optimum combination contains around 99.5% of recycled demolitions materials mixed with 0.5% of crumb rubber.

While recycled demolition waste has been allowed for use in construction for some time, the research shows that adding crumb rubber from old vehicle tyres actually helps improve mechanical properties for use in road base construction.

The research team has shown that this combined material performs well in terms of strength, deformation and dynamic properties. It can carry heavy loads, is water and acid resistant and offers low shrinkage. Of key importance is that it also offers a degree of flexibility due to the presence of the crumb rubber, meaning that it reduces the risk of crack propagation through base layers. And as cracking is a major cause of failure in road base construction, this last factor highlights the material’s value.

‘An experimental study on the shear behaviour of recycled concrete aggregate incorporating recycled tyre waste’ is published in Construction and Building Materials (DOI: 10.1016/j.conbuildmat.2020.120266

Related Content

  • Higher productivity, lower cost asphalt plants
    February 14, 2012
    Manufacturers are producing innovative asphalt equipment, and operators are benefiting from this as Patrick Smithreports. Asphalt plant manufacturers and operators are understandably placing great emphasis on higher productivity but with lower costs. At the same time they are aware of environmental issues and the ever-increasing use of recycled material in mixes.
  • Iterchimica: greener than ever with Gipave
    July 7, 2023
    Asphalt additive specialist Iterchimica started developing ‘green’ products that help reduce carbon emissions and conserve resources long before it became an industry-wide trend.
  • Novel concrete surfacing option used in Colorado
    December 10, 2015
    Proven polyester bridge deck surfacing technology is now being used more widely – Mike Woof writes. The benefits of using polymer concrete bridge deck overlays are well known and this technology is becoming widely used in the US. The system can improve protection for bridge surfaces and help extend the life of a bridge deck, as well as increasing skid resistance. In the last 25 years the use of these overlays has increased significantly in the US. These perform best when installed on bridge decks that are i
  • New drilling and blasting technology aids efficient quarrying
    April 13, 2012
    Innovations in drilling and blasting and crushing and screening are bringing major economies of scale to aggregate production operations. Drilling and blasting is an area where new technology is offering major saving to quarrying companies. This is another important factor in the quarrying process, as inefficient drilling and blasting can have major financial repercussions.