Skip to main content

Recycling materials for road construction

Recycled demolition material and vehicle tyres could be used for road construction.
By MJ Woof August 20, 2020 Read time: 2 mins
Once tyres have reached the end of their working life, they could be ground down to produce crumb rubber for use in construction - image © courtesy of Mike Woof


New research carried out in Australia suggests that road base material could be produced from recycled demolition rubble and old vehicle tyres.

With the tyres converted into crumb rubber and the rubble sorted, washed and crushed to a suitable size, the combination offers major benefits for road base construction.

According to research from RMIT University in Melbourne, Australia, mixing these materials can provide a suitable base course granulate that meets road engineering safety standards.

Using these materials could help address issues with recycling. The research shows that the optimum combination contains around 99.5% of recycled demolitions materials mixed with 0.5% of crumb rubber.

While recycled demolition waste has been allowed for use in construction for some time, the research shows that adding crumb rubber from old vehicle tyres actually helps improve mechanical properties for use in road base construction.

The research team has shown that this combined material performs well in terms of strength, deformation and dynamic properties. It can carry heavy loads, is water and acid resistant and offers low shrinkage. Of key importance is that it also offers a degree of flexibility due to the presence of the crumb rubber, meaning that it reduces the risk of crack propagation through base layers. And as cracking is a major cause of failure in road base construction, this last factor highlights the material’s value.

‘An experimental study on the shear behaviour of recycled concrete aggregate incorporating recycled tyre waste’ is published in Construction and Building Materials (DOI: 10.1016/j.conbuildmat.2020.120266

Related Content

  • Warm asphalt - emission and energy saving
    February 28, 2012
    Warm mix asphalt is said to offer many benefits including fewer emissions and energy savings, but further research is needed to "validate its expected performance and added value" claims one organisation. Patrick Smith reports
  • Versatile materials recycling with Wirtgen
    May 18, 2021
    Wirtgen is now offering a versatile solution for materials in the shape of its latest KMA 240(i) model. This replaces earlier versions of the KMA, providing increased performance and capabilities
  • A rejuvenator derived from pine trees and natural asphalt
    November 20, 2015
    This month we look at two additives from natural sources: a rejuvenator derived from pine trees and naturally occurring asphalt - Kristina Smith writes One of the problems experienced with pavements containing RAP is that, although they exhibit good rutting resistance, they often fail early due to fatigue cracking. Biorefiner Arizona Chemical has just unveiled independent test results for its SYLVAROAD RP1000 Performance Additive that it says demonstrate that the rejuvenator can help create mixes that ar
  • Innovations in aggregate production
    February 20, 2012
    Innovations abound in the aggregate production sector - Mike Woof reports. With road construction accounting for a significant percentage of aggregate production, developments in this industry are of major importance for the highway sector. Technical advances in aggregate production methods have pushed technological boundaries, resulting in cost/tonne reductions for products and improving operating efficiency for major producers.