Skip to main content

Recycling materials for road construction

Recycled demolition material and vehicle tyres could be used for road construction.
By MJ Woof August 20, 2020 Read time: 2 mins
Once tyres have reached the end of their working life, they could be ground down to produce crumb rubber for use in construction - image © courtesy of Mike Woof


New research carried out in Australia suggests that road base material could be produced from recycled demolition rubble and old vehicle tyres.

With the tyres converted into crumb rubber and the rubble sorted, washed and crushed to a suitable size, the combination offers major benefits for road base construction.

According to research from RMIT University in Melbourne, Australia, mixing these materials can provide a suitable base course granulate that meets road engineering safety standards.

Using these materials could help address issues with recycling. The research shows that the optimum combination contains around 99.5% of recycled demolitions materials mixed with 0.5% of crumb rubber.

While recycled demolition waste has been allowed for use in construction for some time, the research shows that adding crumb rubber from old vehicle tyres actually helps improve mechanical properties for use in road base construction.

The research team has shown that this combined material performs well in terms of strength, deformation and dynamic properties. It can carry heavy loads, is water and acid resistant and offers low shrinkage. Of key importance is that it also offers a degree of flexibility due to the presence of the crumb rubber, meaning that it reduces the risk of crack propagation through base layers. And as cracking is a major cause of failure in road base construction, this last factor highlights the material’s value.

‘An experimental study on the shear behaviour of recycled concrete aggregate incorporating recycled tyre waste’ is published in Construction and Building Materials (DOI: 10.1016/j.conbuildmat.2020.120266

Related Content

  • Testing highway materials for best performance
    February 23, 2012
    Big increases in traffic mean that today highways are under greater pressure than ever, and materials have to perform to increasingly higher standards. Modern highways, particularly in and around major cities, are tested like never before, and it is essential that surfaces are built to withstand increasing traffic.
  • Advances in bitumen technology will boost surface wear life and quality
    September 19, 2012
    From chip fat to banana bags, the race is on to find new bitumen additives which will solve two problems with one solution: replace diminishing petrochemical-based products and make use from waste rather than landfilling it - Kristina Smith reports It is not just the desire to preserve our environment which is driving the industry’s search for products which don’t eat up raw materials. The hunger of emerging economies – particularly China – mean that resources can be hard to come by, so it makes sense for s
  • Waste-full paving in Australia
    November 18, 2022
    The use of waste materials in roads, including higher proportions of RAP, is gaining ground.
  • The role of anti-stripping agents in asphalt performance
    November 25, 2016
    Anti-stripping agents are often overlooked when boosting the performance of asphalt, according to Italian road chemicals producer Iterchimica