Skip to main content

Productive stabilisation

The construction project for an industrial park, which includes building the roads linking to the facility, will benefit from the use of a stabiliser from BoMAG.
March 2, 2012 Read time: 2 mins
The construction project for an industrial park, which includes building the roads linking to the facility, will benefit from the use of a stabiliser from 172 Bomag.

The site is located at Striegistal near Chemnitz in Germany and a new central warehouse facility for Edeka will generate 675 jobs. The ground conditions however required remediation, and the job to provide sound and stable sub-soil was contracted to 3395 MEIER Bodenstabilisierung, based in oelsnitz. The firm has been using BoMAG stabilisers including the new heavy MPh125 unit. MEIER has been using BoMAG machines since 1995 and has wide experience in soil improvement, soil stabilisation, milling, and recycling. This practical experience helped with the development of the BoMAG MPh125 soil stabiliser. The 26tonne machine is driven by a 440kW Deutz diesel, while it features a rotor width of 2.33m.

The unit is also equipped with a water system to provide the correct soil moisture content.

Besides the MPh 125, MEIER has also been using several smaller MPh122-2 stabilisers.

In Striegistal, a total volume of 320,000m³ soil requires improvement, in this case, through the addition of lime. After improvement, the soil features greater load bearing capacity so that new structures with higher loadings can be constructed.

Initially, the planned daily output was 7,500m³ but productivity has been increased and 10,000- 12,000m³ is now being treated/ day. The BoMAG MPh125 mixes in white lime, using an average dosage of 10kg/m² from a spreader. The lime is mixed with natural soil which contains clay with a relatively high moisture content and is checked daily by the Baugrund Sachsen soil laboratory to determine the optimum water content on which to calculate the lime content needed to produce the highest load bearing capability.

For more information on companies in this article

Related Content

  • BOMAG extends milling machine range
    March 2, 2016
    BOMAG is extending its milling machine range with new large, medium and compact machines. The new top-of-the-range milling machines are the BM2000/75 and BM2200/75, with cutting widths of 2m and 2.2m respectively. These machines can cut to depths of 350mm and are said to have more power than rival models in their class due to the 560kW engine. However the machines are also said to be economical on fuel and offer lower running costs than earlier generation machines of a similar size. A key feature is the new
  • BOMAG extends milling machine range
    January 6, 2017
    BOMAG is extending its milling machine range with new large, medium and compact machines. The new top-of-the-range milling machines are the BM2000/75 and BM2200/75, with cutting widths of 2m and 2.2m respectively. These machines can cut to depths of 350mm and are said to have more power than rival models in their class due to the 560kW engine. However the machines are also said to be economical on fuel and offer lower running costs than earlier generation machines of a similar size. A key feature is the new
  • Big jobs for the Atlas 140 W ‘bigfoot’ all terrain excavator
    January 17, 2018
    The ATLAS 140 W is equipped with huge 710/45-26.5 20 PR tyres and an undercarriage developed for working on marshy wet ground. The 140 W also has a speed of 30kph on roads and pathways so it can be used for all types of jobs on both difficult wet terrain and on the road,” said Frank König, employee of the local authority maintenance association Untere Oste, based in Hemmoor, a small town in northern Germany. The association maintains nearly 600km of waterways, pumping stations, polder and barrage pumping
  • New compact slipformer widens G&Z range
    March 17, 2016
    A new and more compact slipform paver is being introduced by Guntert & Zimmerman, widening the firm’s range of models. The company has been known in the past for its large slipform pavers used in road and airport runway jobs but in recent years has developed smaller and more compact units. The S400 shares many of its features with the existing S600, which was previously the most compact model in the line-up. The firm’s German representative, Peter Hedke said, “It’s the smallest machine we’ve ever built.”